*mydirectindustry

HPR

HPR

Product catalog summary

Technical Specifications:
The document provides detailed technical specifications for the CTK 3.5 EFS Hydraulic Torque Wrenches, specifically the HPR series. It includes information on drive units, torque ranges, dimensions, and weights for different models (RE 500, RE 1000, RE 1500).

Drive Units:
- RE 500: Torque range of 5,000 - 50,000 Nm, weight 34 kg.
- RE 1000: Torque range of 10,000 - 100,000 Nm, weight 45 kg.
- RE 1500: Torque range of 15,000 - 150,000 Nm, weight 76 kg.

Operation and Power:
The CTK 3.5-EFS operates manually with a single flow stage. It has dimensions of 500 x 343 x 465 mm, weighs 35 kg, and operates at a maximum pressure of 350 bar. It uses an electrical three-phase current with a nominal power of 2.2 kW and a flow rate of 3.5 l/min.

Ring Spanners:
The document lists various ring spanners with specific code numbers, sizes (both metric and inch), and maximum capacities. Intermediate sizes are available upon request.

General Information:
The document notes that reproduction and copying are only allowed with written permission. It is subject to amendments, and the company does not take responsibility for printing errors or inaccurate information. The document version is from April 2014.

Catalog excerpts

Hydraulische Drehmomentschrauber HPR Hydraulic Torque Wrenches HPR Technische Daten, metrisch / Technical data, metric

Open the catalog to page 1

Type Operation mode Forder- Abmessungen Gewicht stufen L x B x H Weight Flow Dimensions (kg) Betriebsdruck Antrieb Operating Drive Antriebsleistung Fordervolumen Nominal power Flow rate (kW) (l/min) manual electrical three phase current

Open the catalog to page 2

Ringschlussel Ring spanners ZwischengroBen auf Anfrage/Intermediate sizes on request

Open the catalog to page 3

Code no. A/F Max. capacity (Zoll / inch) (mm) (mm) (Nm) ZwischengroBen auf Anfrage/Intermediate sizes on request

Open the catalog to page 4

ZwischengroBen auf Anfrage/Intermediate sizes on request

Open the catalog to page 5

ZwischengroBen auf Anfrage/Intermediate sizes on request

Open the catalog to page 6

Torque S. Tension Systems Maschinenfabrik Wagner GmbH & Co. KG Birrenbachshohe • 53804 Much • Germany Tel. national: (02245) 62-0 Fax national: (02245) 62-66 Phone international: +49 (0)2245 62-10 Fax international: +49 (0)2245 62-22 [email protected] • www.plarad.com Nachdruck und Kopie, auch auszugweise, nur mit vorheriger schriftlicher Genehmigung. Anderungen vorbehalten. Fur Druck- und Informationsfehler ubernehmen wir keine Verantwortung. / Reproduction and copying of this volume, in whole or in part, is permissible only with express written permission. Subject to amendment. We take no...

Open the catalog to page 7

HPR

HPR

Catalog excerpts

All PLARAD - Maschinenfabrik Wagner catalogs and technical brochures