*mydirectindustry

KSA

KSA

Product catalog summary

Overview: The KSA series fans are designed for wood drying kilns, available in diameters ranging from Ø1000 to Ø2150 mm. They are equipped with reversible or one-direction flow impellers and are suitable for installations requiring large air movement, such as wood drying kilns and brick drying rooms.

Specifications:

Diameter: Ø1000 to Ø2150 mm
Impellers: Reversible (bi-directional) or one-direction flow
Material: Aluminum impellers with lightweight, hollow blades
Operating Temperature: Standard -20 to +105°C, Optional -30 to +120°C
Motor Output: 4.0 to 55 kW
Motor Speed: 750, 1000, 1500 min-1
Air Volume Range: 20000 to 120900 m3/h

Features:

Robust impeller design with high efficiency
Resistance to corrosive agents
High-quality components in electric motors
Optimized housing shape for maximum airflow

Electric Motor Details:

Type: Asynchronous 3-phase
Supply Voltage: 3~ 230/400V; 400/690V
Insulation Class: F or H
Ingress Protection: IP 55 (optional IP 56, IP 66)
Optional Features: Winding and bearing temperature sensors, grease nipples

Optional Features:

Explosion-proof for hazard zones
Stainless steel casing
Additional powder coating
Custom flow parameters

Technical Data: The document provides detailed technical data for various fan models, including diameter, motor output, revolution speed, maximum air volume, pressure, and mass.

Manufacturer Information: Planetfan Ltd. is an ISO 9001:2015 and ISO 45001:2018 certified company based in Poland, specializing in the production of axial and radial fans.

Additional Information: For smaller diameter fans (Ø500 to Ø1000 mm), the KSU and KSBF series are recommended.

Catalog excerpts

FANS TYPE KSA 01000 * 02150 mm DESIGNED for WOOD drying KilNS European Funds Smart Growth European Union European Regional Development Fund

Open the catalog to page 1

Fans type KSA 01000 * 02150mm designed for wood drying kilns KSA fans are produced in diameters from 01000 to 02150mm. As standard, they are available with reversible (bi-directional) impellers or one direction flow impellers. They are successfully installed in installations where large amounts of air must be moved. Mainly used in very large wood drying kilns or continuous (progressive) kilns. KSA fans are equipped with aluminum impellers, built on the basis of light hollow blades. Such design provides maximum air flows in a housing with short inlet and outlet. KSA fans are adapted to operate...

Open the catalog to page 2

PLHNETFRl ' Technical data CUSTOMIZED FANS SEND US REQUIRED DUTY POINT FOR BIGGER DIAMETER FANS OUR TEAM WILL SELECT FOR YOU AN APPROPRIATE FAN The flow parameters presented in this brochure have been determined for the air density of p = 1.2 kg /m3 and are indicative data showing the general performance and pressure ranges of KSA fans. The dimensions of the products provided are not binding and constitute general information. The manufacturer reserves the right to change, correct and/or improve the information and products presented in this brochure.

Open the catalog to page 3

Planetfan – is ISO 9001:2015 & ISO 45001:2018 certified company. Planetfan Ltd. is a producer of axial and radial fans. It has an engineering staff and its own research laboratory to determine flow curves. It produces fans equipped with motors outputs from 0.75 to 200kW. Production takes place in Poland. The full range of production is available at: www.planetfan.pl Do you need smaller diameter fans than Ø1000mm dedicated for wood drying kilns? Check out our KSU and KSBF series fans with diameters from Ø500 to Ø100

Open the catalog to page 4

All Planetfan catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list