PLANETA Compact electric rope winch PLA-B PLA-B is concipated as a pulling winch, but can also lift and hold loads with an integrated brake. Since there are no limit switches, both rope end positions must be watched and supervised. The winch is a lightweight with its aluminium housing and easy to carry. Features: • For 1-Ph/230 Volt/50 Hz - other voltages also for other countries • Includes 10 m pendant control cable • Includes 3 m power supply cable and country version plug • Motor protection IP 44 • Control IP 65, splash water protected, with emergency stop button. * = Please use as preferred option. Ready for us® with rope and pendant control Electric winch PLA-180B-V6 for wind energy towers This winch is conceived for very large lifting heights in wind energy towers to lift up a tool case or small spare parts into the nacelle. The service man does not have to carry this load up the ladder or risks an overload of the elevator. PLA-180B-V6 is bottom-up attached to the ceiling (see drawing) and is running very fast. A lot of other solutions for the wind industry are available. Special features: • Single phase motor works 1-Ph/230V/ 50 Hz/1.5 kW • With short control cable • With rubber buffer covering the load hook to protect tower walls outside • All screws, nuts, bars etc. made of stainless steel • Galvanized ground plate for strong base fixing • External HENSEL power connection box • Gear box with cooler fan • Limit switch for highest hook position © 2016 by PLANETA-Hebetechnik GmbH, Herne