16-Port 10/100TX 802.3at PoE + 2-Port 10/100/1000T + 1-Port Shared 1000X SFP Desktop Switch (185 Watts) Physical Port • 16 10/100BASE-TX RJ45 ports with IEEE 802.3at PoE+ injector function (ports 1~16) • 2 10/100/1000BASE-T Gigabit RJ45 ports interfaces (ports 17~18) • 1 1000BASE-X SFP interface (port 17) Power over Ethernet Cost-optimized, Multi-mode Ethernet Switch for PoE Networking To facilitate 32W PoE power network applications with the transmission, PLANET FGSD-1821P is equipped with 16 10/100BASE-TX Fast Ethernet ports, 2 extra Gigabit TP ports and 1 1000BASE-X SFP combo interface ideally suitable for centralized power management. With a total of 185 watts of PoE budget, it features high-performance Gigabit uplink and IEEE 802.3at PoE+ (up to 32W) capabilities. • Complies with IEEE 802.3at Power over Ethernet Plus endspan PSE • Up to 16 ports of IEEE 802.3af/802.3at devices powered (ports 1~16) • Supports PoE power up to 32 watts for each PoE port, with a total PoE budget of 185W • Each port supports 55 DC power to PoE powered device • Auto detects powered device (PD) • Supports PD alive function • Circuit protection prevents power interference between ports • Remote power feeding up to 100m in standard mode with 250m in extend mode Switching • Hardware-based 10/100Mbps and 10/100/1000Mbps auto- Two Gigabit Uplink Ports The FGSD-1821P provides two extra Gigabit TP ports and one 1000BASE-X SFP combo interface that enable the network administrators to increase their network bandwidth to relieve traffic congestion when the two 10/100/1000BASE-T or one 1000BASE-X uplink port are used to connect devices, such as NVR, video streaming server, NAS and more. With the combo design, the administrators can easily connect network devices no matter how large the network expansion is. Perfect Integrated Solution for PoE IP Surveillance The FGSD-1821P brings you an ideally secure surveillance system at a lower total cost. The FGSD-1821P provides 16 10/100Mbps 802.3at PoE+ ports able to feed sufficient PoE power to 16 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a highperformance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites. negotiation and auto MDI/MDI-X • Supports IEEE802.3x flow control in full-duplex mode and backpressure in half-duplex mode • Integrates address look-up engine, supporting 16K absolute MAC addresses • 16K jumbo frame supports 1000Mbps speed • Hardware-based DIP switch for Standard, VLAN or Extend mode selection –– VLAN mode: Ports 1 to 16 cannot communicate with each other, but can communicate with the uplink ports 17 to 18 and SFP port 17 –– Extend mode: Ports 1 to 8 have data rate of 10Mbps. The farthest transmission distance is up to 250 meters and all ports can communicate with each other • VLAN mode is to isolate ports to prevent broadcast storm and defend DHCP spoofing • Automa

• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) Door Phone Video Phone • 11-inch desktop size, 1U height • LED indicators for system power, per port PoE ready and PoE activity, speed, link/act Thin Client IP Camera • 1 silent fan to provide stable and efficient power performance Wireless AP/Router • Supports contact discharge of ±6KV DC and air distance WiMAX AP/CPE discharge of ±8KV DC for Ethernet ESD protection Power Requirement • Supports ±6KV surge immunity Ethernet Data Transmission Distance Extension The DIP switch provides “Standard”, “VLAN” and “Extend” operation modes....

Extend Mode Standard VLAN Extend Ports 1 to 8 250 meters (820 feet) Powered Device Alive Check The FGSD-1821P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status. The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port...

I PWN€T Networking & Communication Department / Workgroup PoE Network Providing 16 PoE in-line power interfaces, the FGSD-1821P can easily build a power that can centrally control IP phone system, IP camera system and wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the FGSD-1821P makes the installation of cameras easier and more efficient. Non-PoE Camera Specifications Model

i PWN€T Networking & Communication

i PWN€T Networking & Communication Gigabit Ethernet Transceiver (1000BASE-X SFP) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright © 2021 PLANET Technology Corp. All rights reserved. PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) Email: [email protected] www.planet.com.tw