*mydirectindustry

Catalogs
PKTRONICS GROUP
W24L100-MRA1HB

W24L100-MRA1HB

Product catalog summary

Product Overview: The W24L100-MRA1HB is a 24-inch marine bridge system display designed for sunlight readability and enhanced durability in marine environments.

Features:

Sunlight readable with high brightness technology (2900 cd/m² typical).
Wide viewing angles of 178° horizontally and vertically.
IP66 aluminum housing with powder coating for front and IP54 for rear, ensuring protection against dust and water.
Enhanced shock and vibration resistance.
Optional touchscreen and anti-reflective protection glass.

Display Specifications:

Resolution: 1920 x 1080 pixels.
Contrast Ratio: 5000:1 (typical).
Active Display Area: 531.36 mm x 298.89 mm.
Max Colors: 16.7 million (8-bit).

User Controls:

Power On/Off via front button.
VR Brightness Knob Control for dimming from nearly 0% to 100%.
On Screen Display (OSD) control with remote capability via RS-232.

Input Signals:

RGB Signal, DVI-D Signal, DC Power Signal, AC Power Signal (optional).
Remote control via RS-232 (optional).

Mechanical and Environmental:

Operating Temperature: -10 to 55°C.
Operating Humidity: 5% to 95% (non-condensing).
Anti-Vibration: 5Hz~500Hz / 1Grms/3 Axis.
Anti-Shock: 15G, 11ms duration.

Power Specifications:

Power Supply: 24V DC Isolated Power Module.
Power Consumption: 80 W typical during normal operation.

Certifications and Approvals: CE, FCC certified.

Additional Options:

3mm Anti-reflective protection glass.
Touch Screen Options available.

Note: For further product information, contact the sales representative.

Catalog excerpts

n Marine Bridge System Display W24L100-MRA1HB www.eurocls.com :9)l ■ Hyper Dimming ■ Sunlight Readable ■ Anti-Corrosion & IP Proof ■ Wide Voltage Range Input ■ Touchscreen/ Protection Glass ■ IP65 OSD Fornt Panel Design ■ Anti-Shock and Vibration Dimming knob control backlight brightness from nearly 0% to 100% High Brightness technology enhance visibility IP66 aluminum housing with powder coating design (IP54 rear) 24V DC Isolated Power Module High quality touchscreen / AR protection glass for option Ease of use front panel OSD control Enhanced shock and vibration resistance Mechanical Design Drawings TFT Characteristics: Pixel Number Pixel Pitch(RGB) Contrast Ratio Light Intensity Viewable Angles Active Display Area Max Colors CUT OUT * Note: this is a simplified drawing and some components are not marked in detail. Please contact our sales representative if you need further product information. User Controls: Power On/Off via front button VR Brightness Knob Control Power Mode Status LED On Screen Display control(OSD) OSD Remote Control via RS-232 Power Specifications: Power Supply Options : 24V DC Isolated Power Modul Power Consumption : 80 W typical, normal operation Input Signals: RGB Signal DVI-D Signal DC Power Signal AC Power Signal (Optional) Touch Screen (Optional) Remote via RS-232 (Optional) Certification and Approvals Mechanical and Environmental: ~ Available Options: Touch Screen Options : 5 Wire Resistive AR Safety Glass Options : 3mm Anti-reflective protection glass Multiscan Function : PIP function & multi-video inputs D-SUB 15P connector(female) DVI-D input 24pin connector Screw terminal block Std IEC Inlet D-SUB 9P connector (female) D-SUB 9P connector (female) CE,FCC ZI de St Guenault 16, rue Jean Mermoz 91080 EVRY COURCOURONNES France Note: All Specifications are subject to change without prior notice!

Open the catalog to page 1

All PKTRONICS GROUP catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list