Flow Measurement and Monitoring DP02 Paddle-Type Flow Switch with Cable Connection • for liquids • with and without T-fitting, for piping 3/8“ to 6“ • design in brass, stainless steel or T-fitting of PVC • causes only slight pressure drop • pendulum system of stainless steel • max. pressure: 25 bar max. temperature: 110 °C • switching ranges: 2,7...4,5 to 440...655 l/min Typical application: The flow switch model DP02 works according to the proven paddle- principle. The flowing liquid pushes against the surface area of a paddle mounted at the end of a pivoting arm. The dynamic pressure against the plate deflects the arm. Then a permanent magnet which is attached on the other end of the arm switches an adjustable reed contact. By moving the reed contact different switching points can be set. The DP02 paddle flow switch is suitable for monitoring the switching point of low viscosity liquids. The setting of the switching point takes place within the process. PKP Prozessmesstechnik GmbH Borsigstr. 24 • D-65205 Wiesbaden

Models, Switching ranges: Nominal Size DN Order Code: Switch off at [l/min] H2O] DP02.1-4: with brass, stainless steel or PVC T-fitting DP02.5-7: with screw in thread made of brass or stainless steel Dimensions: Nominal size DN DP02.1/2: with T-fitting made of brass/ brass nickel plated 10 15 20 25 32 40 50 * round housing PKP Prozessmesstechnik GmbH Borsigstr. 24 • D-65205 Wiesbaden Order number: Paddle-type Flow Switch with cable connection Model: 1 = T-fitting made of brass with female thread R 2 = T-fitting made of brass nickel plated with female thread R 3 = T-fitting made of stainless steel...