ST G series new safety sensors with RFID technology
12Pages

Safety sensors with RFID technology ST G series

ST G series safety sensors with RFID technology Introduction Pizzato Elettrica presents the latest development in the ST series of RFID safety sensors, already well known to and appreciated by machinery manufacturers and users. The new ST G series sensors incorporate all of the technology used in the traditional ST D series of sensors, in an even more compact housing. The symmetry of the housing allows the same sensor to be used on both left and right doors; by simply rotating the sensor onto itself. The 22 mm fixing pattern and compact external dimensions allow replacement of traditional...

Symmetrical housing Both sensor and actuator are perfectly symmetri‑ cal, and can therefore be attached to the machine frame in any orientation. This feature allows the user to decide the side on which the cable or connec‑ tor should exit, according to the sensor mounting position, by simply rotating it into the desired direction; thus eliminating the need to order differ‑ ently coded products. Multicolour signalling LED The ST G series sensors have a multicol‑ our RGB signalling LED, which, using suit‑ able transparent lenses, can be seen from both sides of the device. This allows fast,...

ST G series safety sensors with RFID technology Selection diagram Standard actuator actuation distance 11 mm lateral fixing actuator actuation distance 11 mm fixing on 2 levels Miniaturized actuator actuation distance 11 mm front fixing Large actuator actuation distance 18 mm front fixing OUTPUT TYPE integrated M12 technopolymer connector integrated M12 stainless steel connector ST G••••M0.2 cable, length: 0.2 m, with M12 connector

Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. Code structure for sensor with actuator

ST G series safety sensors with RFID technology Main features • Actuation without contact, using RFID technology • Digitally coded actuator • Protection degrees IP67 and IP69K • Symmetrical housing with universal fixing orientation • Multicolour signalling LED Technical data Housing Housing made of glass fibre reinforced technopolymer, self-extinguishing. Versions with integrated cable 5 x 0.25 mm2 or 8 x 0.25 mm2, length 2 m, other lengths on request. Versions with integrated M12 connector, plastic or stainless steel, AISI 304. Versions with 0.2 m cable length and M12 connector, other...

Features approved by UL Electrical Ratings: 24 Vdc Class 2, 0,20 A Accessory for series ST for actuator switch series SM D, SM E, SM G, SM L. The models provided with M12 Connector may be provided with the mating-Connectors-part (with Cord attached). Please contact our technical department for the list of approved products. -35°C ... + 85°C (T8 option) Storage and transport temperature: -25°C ... +85°C In compliance with standards: Machine Directive 2006/42/EC, EN ISO 13849-1:2015, EN 60947-5-3:2013, EN 61508-1:2010 (SIL 3), EN 61508-2:2010 (SIL 3), EN 61508-3:2010 (SIL 3), EN 61508-4:2010...

Complete safety system The use of complete and tested solutions guarantees the electrical compatibility between the sensors of the ST series and the safety modules from Pizzato Elettrica, as well as high reliability. The sensors have been tested with the modules listed in the adjacent table. ST sensors can be used as individual devices provided that the out- All ST series sensors can be connected, provided that compatibility is puts be evaluated by a Pizzato Elettrica safety module (see table for checked, to safety modules or safety PLCs with OSSD inputs. combinable safety modules)....

Operating states The multicolour signalling LED, which can be seen from both sides of the device, provides easy and intuitive verification of sensor operating state. GREEN LED Normal operating state, with actuator inside detection zone. YELLOW LED Normal operating state, with actuator outside detection zone. RED LED Error state: the error type is indicated to the user via LED illumination sequences and colour variations. PURPLE LED Programming state during new actuator identification procedure. When aligning the sensor with the actuator, the multicolour signalling LED changes colour to...

Internal device connections lal for articles ST G^3««, ST G^7««. Ibl for articles ST G^4««, ST G^8««. Icl for articles ST G^5««. Legend A1-A2: supply IS1-IS2 Safety inputs OS1-OS2: safety outputs O3: signalling output I3: programming input EDM: input for monitoring of NC contacts of the contactors NOTE: Versions with customised pin assignments are available on request. For female connectors, see page 321 of the General Catalogue Safety 2019-20 Series connection To simplify series connections of the devices, various M12 connectors are available that allow complete wiring. This solution...

Operating distances for SM G»T, SM D*T, SM L»T actuators (mm) 25 20 15 Operating distances for SM E*T actuators (mm) 30 \ 25 Rated operating distance sn (mm) Rated release distance sm (mm) Note: The progress of the activation areas is for reference only; the possible application on ferromagnetic surfaces can reduce the operating distances. ST G****N sensor with cable ST G****MP sensor with M12 connector ST G****M0.2 sensor with cable and M12 connector The 2D and 3D files are available at www.pizzato.com

General Catalogue Detection General Catalogue Safety General Catalogue Elevators Website www.pizzato.com PA S S I O N FO R Q U A L I T Y Pizzato Elettrica s.r.l. Via Torino, 1 - 36063 Marostica (VI) Italy Telephone +39 0424 470 930 E-mail: info@pizzato.com Website: www.pizzato.com Any information or application example, connection diagrams included, described in this document are to be intended as purely descriptive. The choice and application of the products in conformity with the standards, in order to avoid damage to persons or goods, is the user’s responsibility. The drawings and data...