NS series safety switches with solenoid and RFID technology

NS series safety switches with solenoid and RFID technology Maximum safety with a single device Description These switches are used mainly on machi‑ nes where the hazardous conditions persist even after the machine has been switched off. Mechanical parts such as pulleys, saw blades, etc., could continue to move after the machine is switched off or could still be hot or under pressure. Thus, the switches can also be used if individual guards are only to be opened under certain conditions. Versions with mode 1 (safety outputs active when guard closed and locked) are interlocks with guard locking...

Six LEDs for immediate diagnosis As the LEDs have been designed for quick immediate diagnosis, the status of each input and output is highlighted by one specific LED. This makes it possible to quickly identify the interruption points in the safety chain, which device is released, which door is opened and any errors inside the device. All of this at a glance, without needing to decode complex flashing sequences. Holding force of the unlocked actuator The inside of each switch features a device which holds the actuator in its closed position. Ideal for all those appli‑ cations where several doors...

Locked actuator with de-energised solenoid key release at front Locked actuator with de-energised solenoid key release at front and escape release button at back Locked actuator with de-energised solenoid release by means of screwdriver at front and escape release button at back Locked actuator with energised solenoid Without release at front and escape release button at back D»AZ Locked actuator with de-energised solenoid release by means of screwdriver at front E»ZZ Locked actuator with energised solenoid Low level coded actuator High level coded actuator 1J -1 J -B With PVC cable at bottom...

Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. article NS D4AZ1SMK-F41E36LP30 Release button length Operating principle for max. 15 mm wall thickness (standard) locked actuator with de-energised solenoid. mode 1: OS safety outputs active with inserted and locked actuator locked actuator with energised solenoid. mode 1: OS safety outputs active with inserted and locked actuator locked actuator with de-energised solenoid. mode 2: OS safety outputs active with inserted actuator Actuator extraction...

Technical data Housing made of glass fibre reinforced technopolymer, self-extinguishing and shock-proof Versions with integrated cable 12x0.14m2 or 8x0.34m2, standard length 2 m, other lengths from 0.5 ... 10 m on request Versions with integrated M12 stainless steel connector Versions with 0.2 m cable and M12 connector, other lengths from 0.1 ... 3 m on request Protection degree: IP67 acc. to EN 60529 IP69K acc. to ISO 20653 from direct high-pressure and high-temperature jets) General data SIL level (SIL CL): up to SIL 3 acc. to EN 62061 Performance Level (PL): up to PL e acc. to...

Activation mode of the OS1 and OS2 safety outputs Mode 1 S Safety outputs OS1 and OS2 are active when the actuator is inserted and locked. Safety outputs OS1 and OS2 are active when the actuator is inserted. Safety output OS1 is active when the actuator is inserted and locked and IS1 is active. Safety output OS2 is active when the actuator is inserted and IS2 is active. Interlocking Locking function function In case of machines with or without inertia of the dangerous elements. Safety category of the safety outputs: PL e, SIL 3. In case of machines without inertia of the dangerous elements. Safety...

Complete safety system The use of complete and tested solutions guarantees the electrical compatibility between the NS series switches and the safety modules from Pizzato Elettrica, as well as high reliability. The switches have been tested with the modules listed in the adjacent table. The diagram on the side represents the 7 logic functions which interact inside the device. Function f0 is a basic function and includes the monitoring of the power supply as well as internal, cyclical tests. Function fl monitors the status of the device inputs, whereas function f2 monitors the presence of the...

Actuation sequence in mode 1 PWR ♦ ACT O IN 9 LOCkO OUT O The switch is supplied with power (PWR LED on, green), the IS1 and IS2 inputs are enabled (IN LED on, green), the OS1 and OS2 safety outputs are disabled (OUT LED off). The actuator is outside of the actuation zone (LED ACT off). When the actuator is brought inside the safe actuation area (dark grey area), the switch turns on the ACT LED (green). In this position, the O3 signalling output (door-closed) is activated. The actuator is not locked (LOCK LED off). The IE1, IE2 inputs can be used to lock the actuator (LOCK LED on, green). The...

NS series safety switches with solenoid and RFID technology Series connection of several switches Lock detection function (guard locked) 2 channels / Category 4 / up to SIL 3 / PL e Lock detection function (guard locked) 2 channels / Category 4 / up to SIL 3 / PL e Locking control function 1 channel / Category 2 / up to SIL 2 / PL d Locking control function 2 channels / Category 4 / up to SIL 3 / PL e Connector pin assignment M12 connector, 12-pole Internal cable wiring stand-alone connection series connection with “Y” connectors Supply input 0 V Solenoid activation input Solenoid activation...

Dimensional drawings Switch NS ••AZ1DMK NS ••ZZ1DMK Extra copy of the locking keys to be purchased if further keys are needed (standard supply: 2 units). The keys of all switches have the same code. Other codes on request. Extensions for escape release button Description Metal extension for escape VN NG-LP30 release button. For max. wall thickness of 30 mm Metal extension for escape VN NG-LP50 release button. For max. wall thickness of 50 mm Red metal escape release button Metal extension for escape VN NG-LP40 release button. For max. wall thickness of 40 mm --Metal extensions can be combined...