RFID Safety switch with solenoid NG series

NG series safety switches with solenoid and RFID technology Maximum safety with a single device Description These switches are used on machines where the hazardous conditions remain for a while, even after the machines have been switched off, for example because of mechanical inertia of pulleys, saw disks, parts under pressure or with high temperatures. They can also be used when it is necessary to control machine guards allowing the opening of protections only under specific conditions. Constructed with redundant electronic technology, the NG series switches make it possible to create circuits...

Six LEDs for immediate diagnosis As the LEDs have been designed for quick immediate diagnosis, the status of each input and output is highlighted by one specific LED. This makes it possible to quickly identify the interruption points in the safe chain, which device is released, which door is opened and any errors inside the device. All that in a straightforward way without needing to decode complex blinking sequences. Double anti-tampering safety Each NG series actuator is supplied with four stainless steel tamper-proof screws, for it to be fitted on the protection. Four protection insert caps...

NG series safety switches with solenoid and RFID technologySelection diagram D5D locked actuator with de-energised solenoid with key release. D6D locked actuator with de-energised solenoid with key release and emergency release button. D7D locked actuator with de-energised solenoid with emergency release button D7E locked actuator with energised solenoid with emergency release button HEAD TYPE AND WORKING PRINCIPLE D1D locked actuator with de-energised solenoid D1E locked actuator with energised solenoid COVERS CONFIGURATIONSVN NG-F30 low level coded actuator high level coded actuator product...

Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office. article options Inputs and outputs 2 safety inputs IS1, IS2 2 safety outputs OS1, OS2 3 1 signalling output O3: closed protection 1 signalling output O4: locked protection 1 solenoid activation input I4 The switch is only available with its actuator 2 safety inputs IS1, IS2 2 safety outputs OS1, OS2 1 signalling output O3: closed protection 1 signalling output O4: locked protection 1 solenoid activation input I4 1 programming input I3 2 safety...

Technical data Housing Metal head and housing, baked powder coating. Three threaded conduit entries: M20x1.5 IP69K acc. to ISO 20653 Degree of protection with control devices: IP65 acc. EN 60529 with cable gland having equal or higher protection degree Main features • Actuation without contact, using RFID technology • Digitally coded actuator • Actuator holding force 9750 N • SIL 3 and PL e with a single device • Optional built-in control devices • Metal housing, three conduit entries M20 • Protection degrees IP67 and IP69K • Versions with key release and emergency release button • PL e...

Characteristics approved by UL Utilization categories: 24 Vdc, 0.25 A (resistive load). Inputs supplied by remote class 2 source or limited voltage and limited energy. In conformity with standard: UL 508, CSA 22.2 No.14 Please contact our technical service for the list of approved products. Characteristics approved by TUV SUD Protection degree: IP67, IP69K Ambient temperature: -20°C ... +50°C Storage temperature: -40°C ... +75°C PL, category: PL e, Cat. 4. SIL: SIL 3 / SIL CL 3 In conformity with standards: 2006/42/EC, EN 60947-1/A1:2011, EN 60947-5-2/A1:2012, EN 60947-5-3:2013, EN ISO 14119:2013,...

Complete safety system The use of complete tested solutions means that the customer can be certain of the electrical compatibility between the NG series switch and Pizzato Elettrica safety modules, thus ensuring greater reliability. In fact, these sensors have been tested for operation with the modules specified in the table shown on the side. Once their compatibility has been verified, all NG series safety switches can generally be connected to safety modules or safety PLCs recognising OSSD input signals. The NG series switch can be used individually, prior evaluation of the safe outputs by...

Actuation sequence in mode 1 The switch is supplied with power (PWR LED on, green), the IS1 and IS2 inputs are enabled (IN LED on, green), the OS1 and OS2 safety outputs are disabled (OUT LED off). The actuator is on the outside of the activation zone (LED ACT off). When the actuator is brought inside the safe activation area (dark grey area), the switch turns on the ACT LED (green). In this position, the O3 door-closed signalling output is activated. The actuator is not locked (LOCK LED off). The I4 input can be used to lock the actuator (LOCK LED on, green). The OS1 and OS2 safe outputs are enabled...

Input configuration with monitored start 2 channels / Category 4 / up to SIL 3 / PL e Input configuration with monitored start The connections vary according to the program of the module2 channels / Category 4 / up to SIL 3 / PL e Category 4/ up to SIL 3 / PL e Internal connections (standard cover version NG 2D»»1A) Internal terminal strip stand-alone connection series connection with "Y" connectors Important: terminals 7, 8, 9, 17, 18 of the internal terminal strip cannot be used. (a) Available only in version NG 2D**5*** (b) For NG 2D**6*** the output signals the device FAULT condition....

Dimensional drawings Switch NG 2D1D••1A Working principle D, supplied with sealable auxiliary release device, without actuator Switch NG 2D1E••1A Working principle E, without actuator Switch NG 2D5D••1A Working principle D, with key release, without actuator 40 Switch NG 2D6D••1A Working principle D, with key release, emergency release button, without actuator Switch NG 2D7D••1A Working principle D, with emergency release button, without actuator Switch NG 2D7E••1A Working principle E, with emergency release button, without actuator