Mechatronic safety devices

NG Series connection Multiple sensors can be connected in series. With up to 32 sensors connected in series, PL e safety level laid down in EN ISO 13849‑1 and SIL 3 acc. to EN 62061 is ensured. The fact that the PL e and SIL 3 can be maintained even with 32 sensors connected in series demonstrates the extremely secure structure of each sensor. PL e + SIL 3 Safety level up to PL e and SIL 3 with a single device. Simple wiring, fast installation times. Safety module connection with digi‑ tal inputs or safety PLC. Insensitivity to dirt The sensors are completely sealed and retain their safety characteristics...

LEDs for immediate diagnosis As the LEDs have been designed for fast and immediate diagnos‑ tics, the status of each input and output is indicated by one spe‑ cific LED. This allows for operational device parameters to be rapidly identified on an indi‑ vidual basis, without needing to decode com‑ plex flashing sequences. Laser engraving All devices are marked using a dedi‑ cated indelible laser system. These engravings are therefore suitable for extreme environments too. Thanks to this system that does not use labels, the loss of plate data is prevented and a greater resistance of the marking...

General Catalogue Detection General Catalogue Safety General Catalogue Elevators Website www.pizzato.com Pizzato Elettrica s.r.l. Via Torino, 1 - 36063 Marostica (VI) Telefono 0424.470.930 - Fax 0424.470.955 E-mail: [email protected] - Sito web: www.pizzato.it © 2018 Copyright Pizzato Elettrica

NS series safety switches with solenoid and RFID technology • SIL 3 and PL e with a single device • High protection degree up to IP67 and IP69K • Actuation without contact, using RFID technology for a long endurance over time • Holding force of the actuator up to 2,100 N • Interlock, no contact, coded, with guard interlock, type 4 acc. to EN ISO 14119 • Reinforced technopolymer housing, self-extinguishing, fully sealed • Actuators with two available coding levels (low and high) acc. to EN ISO 14119 • 3 actuation modes • 6 state signalling LEDs • Automated actuator centring • Upper auxiliary release...

NG series safety switches with solenoid and RFID technology • SIL 3 and PL e with a single device • High protection degree up to IP67 and IP69K • Actuation without contact, using RFID technology for a long endurance over time • Increased actuator holding force of up to 9,750 N • Interlock, no contact, coded, with guard interlock, type 4 acc. to EN ISO 14119 • Metal housing, three M20 conduit entries • Actuators with two available coding levels (low and high) acc. to EN ISO 14119 • Automated actuator centring • Heads and release devices with variable orientation, non-detachable • Dust resistance...

ST series safety sensors with RFID technology • SIL 3 and PL e with a single device • High protection degree up to IP67 and IP69K • Actuation without contact, using RFID technology for a long endurance over time • Interlock, no contact, coded, type 4 acc. to EN ISO 14119 • Housing made of glass fibre reinforced technopolymer, self-extinguishing • Reduced dimensions for easy installation to all guard types • Actuation possible from many directions • Choice of 3 different actuators • Two coding levels options (low and high) acc. to EN ISO 14119 • Sensor can be programmed during installation phase...

HX BEE1 series safety hinge switches with electronic contact block • SIL 3 and PL e with a single device • High protection degree up to IP67 and IP69K • Polished stainless steel AISI 316L housing: safety and style in one product • Three different cable output directions • Output with invisible rear cable for most pleasing guard aesthetics • Clean design: hidden fixing screws • Designed for heavy guards • 4 state signalling LEDs for immediate diagnosis • Fast and safe switching point adjustment • Availability of fixing plates and additional hinges without contact block • Output with M12 connector...