Pister multicouplings PMK Pister Kugelhähne GmbH • Vogesenstraße 37 • D-76461 Muggensturm GERMANY Tel. +49(0)7222/5002-0 • Fax +49(0)7222/5002-50 • www.pister-gmbh.com • [email protected]

Sequence of operation Inserting the tool plate Insert the tool plate into the multicoupling. Close the handle. The system is locked and ready for use when the locking pin is snapped into the handle bar. Removing the tool plate Unlock the system by pulling out the locking pin. Protective equipment Multicoupling with protective plate. Open the handle. Remove the tool plate. Parking station with tool plate. Protective plate and parking station are protecting the couplings against mechanical damage, dust and dirt. 2

Design characteristics Parking station for tool plate • • • • robust and modular design use of hardened steel zinc-nickel-coating as corrosion protection machine side: male connector - tool side: female connector Special designs on request! Removable handle Torsion protection for couplings (increases durability) High pressure couplings up to 450 bar Tool plate Hydraulic locking device at DN20 and DN25: prevents opening when pressurized PMK with integrated locking device Combining different coupling sizes in one PMK is possible Protective plate for coupling is included in the delivery scope Toggle...

Technical data PMK-13/13-1 PMK-13/10/13-1 PMK-20/20-1 PMK-20/20-2 with hydraulic locking device 1 DN10 coupling 50 I/min All possible double and triple designs 1 DN13 coupling 90 I/min All possible double and triple designs 2 DN13 coupling 90 I/min DN13 coupling 90 l/min DN10 coupling 75 I/min DN20 coupling 170 l/min DN13 coupling 125 I/min DN20 coupling 250 l/min DN13 coupling 125 I/min DN13 coupling 125 l/min DN20 coupling 220 l/min DN20 coupling 350 l/min max. operating pressure 330 bar 330 bar 450 bar 375 bar Range of application for excavator in tons 2,5 t - 8 t * 10 t - 16 t * 16 t - 30...