THERMAL FLUID ELECTRIC HEATERS Standard manufacturing program

Thermal Fluid Electric Heaters • Power range between 5 and 6000 kW • Design codes: AD-2000 • CE marked • Low specific charge between 0,5 and 3,5 W/cm2 • Official test pressure: 14 bar • Working pressure: 7 bar The thermal fluid electric heaters heat the fluid through one or several electric resistances. The connection of these resistances allows the division of the power in several steps. The power control is completely automatic and it is guaranteed simply by selecting the desired temperature on the control panel. In the control panel are placed contactors or solid state relays that will activate...

Thermal Fluid Electric Heaters APPLICATIONS: • Research centers • Drying processes • Asphalt / bitumen heating • Storage tanks • Solar energy • Distillation columns HEATER SCHEME: CALORIFIC POWER kcal/h 8 Expansion vessel flange 2 Outlet flange 3 Electrical resistances 4 Resistance body with thermal insulation 5 Control panel 6 Recirculation pump 7 Platform 10 Air separator 11 Interruption ON/OFF valve 12 Filter 13 Filling and draining pump

Thermal Fluid Electric Heaters MAIN DIMENSIONS (mm): OVERALL DIMENSIONS 1 Thermal fluid outlet valve 2 Safety valve 3 Control panel 4 Electrical resistance 5 Thermal fluid inlet valve 6 Drainage valve The manufacturer reserves the right to modify the dimensions according to the final execution drawings.

Thermal Fluid Electric Heaters

Thermal Fluid Electric Heaters