PIRANHA COOLING LINE

Product catalog summary

Overview: The document describes the Piranha Cooling Line, a patented solution for cooling in chip-removing processing. It is designed to fit all standard tool holders and is applicable in various sizes (½ to ¼ inch). The system can withstand pressures up to 80 bar and is versatile for cooling, blowing out, and suction applications. It is cost-effective, lightweight, and features a long lifespan due to its anodic coating. The product is 100% Swiss made.

Specifications: The cooling line includes various components such as spacers, nozzles, threaded connectors, flat nozzles, distributors, and accessories. Each component is available in multiple sizes and configurations to suit different applications. The document lists specific part numbers and dimensions for each component.

Components:

Spacers: Available in sizes ranging from 28mm to 80mm.
Nozzles: Includes round nozzles (Ø1.5mm to Ø10mm), special nozzles with multihole configurations, and flat nozzles (sizes 20mm to 100mm).
Threaded Connectors: Available in various thread sizes including 1/8”, 1/4”, 3/8”, 1/2”, and metric sizes like M8, M10, and M12.
Distributors: Includes 90° elbows, T-distributors, Y-distributors, and Quatro distribution blocks.
Accessories: Includes nuts, caps, O-rings, and hexagon wrenches.

Starter Kit: The Piranha CoolingLine Starter Kit includes a selection of spacers, threaded connectors, nozzles, distributors, and tools, all packaged in a plastic box. The kit dimensions are 210 x 150 x 40 mm.

Contact Information: For more information, contact Piranha Clamp at Sumpfstrasse 32, CH-6312 Steinhausen, phone: +41 41 743 07 30, email: [email protected], or visit www.piranha-clamp.com.

Catalog excerpts

Passt auf alle gängigen Werkzeugträger Fits on all standard tool holders Ist flexibel und variabel anwendbar (½ auf ¼ Zoll) Is flexibly and variably applicable (½ to ¼ inch) Bis 80 Bar Hochdruck einsetzbar Withstands pressures up to 80 bar Vielseitige Verwendung (kühlen, ausblasen, absaugen) Versatile use (cooling, blowing out, suction) Kostengünstig in der Anschaffung Cost-effective acquisition Lange Lebensauer durch Eloxalschicht Long lifespan thanks to anodic coating Geringes Gewicht Light weight Neues Design New design 100% Swiss Made 100% Swiss made PIRANHA COOLING LINE löst alle Kühlprobleme bei der spanabhebenden Bearbeitung solves all cooling problems on chi

Open the catalog to page 1

Gewindeanschlüsse / Threaded connector Düsen / Nozzle Gewindeanschluss 3/8”NPT Threaded connector 3/8” NPT Rund-Düse Ø6mm Round nozzle Ø6mm Gewindeanschluss 3/8” Threaded connector 3/8” Rund-Düse Ø8mm Round nozzle Ø8mm Gewindeanschluss 1/2”NPT Threaded connector 1/2” NPT Rund-Düse Ø10mm Round nozzle Ø10mm Gewindeanschluss 1/2” Threaded connector 1/2” Rund-Düse Ø10mm Mehrloch Round nozzle Ø10mm multihole SDK-22/60º Spez-Düse Mehrloch 60º kurz Special nozzle multihole / 60° short SDL-22/60º Spez-Düse Mehrloch 60º lang Special nozzle multihole / 60° long Spez-Düse Mehrloch 90º kurz Special nozzle...

Open the catalog to page 2

Verteilerstücke / Distributor Flachdüsen / Flat nozzle Flachdüse 30 Flat nozzle 30 T-Verteilerstück T-distributor Flachdüse 40 Flat nozzle 40 Y-Verteilerstück Y-distributor Flachdüse 50 Flat nozzle 50 Y-Verteilerstück Y-distributor Flachdüse 60 Flat nozzle 60 Kugelhahn 1/2” Ball valve 1/2” Flachdüse 80 Flat nozzle 80 Zubehör / Accessories Flachdüse 100 Flat nozzle 100 Ring 22 O-Ring 1/2” O-ring 1/2”

Open the catalog to page 3

Gewindeanschlüsse / Threaded connector Gewindeanschluss 1/8” Threaded connector 1/8” Gewindeanschluss M10 Threaded connector M10 Gewindeanschluss 1/8”NPT Threaded connector 1/8”NPT Gewindeanschluss M10x1 Threaded connector M10x1 Gewindeanschluss 1/4” Threaded connector 1/4” Gewindeanschluss M12x1 Threaded connector M12x1 Gewindeanschluss 1/4”NPT Threaded connector 1/4”NPT Gewindeanschluss R1/8“ lang Threaded connector R1/8“ long Gewindeanschluss M8 Threaded connector M8 Gewindeanschluss Rohling Threaded connector blank GA-M8-L Gewindeanschluss M8 lang Threaded connector M8 long Distanzstücke...

Open the catalog to page 4

Rund-Düse Ø1.5mm Round nozzle Ø1.5mm Spez-Düse Ø1.8mm / 90º lang Special nozzle Ø1.8mm / 90° long Rund-Düse Ø3.5mm Round nozzle Ø3.5mm Spez-Düse Ø1.8mm / 60º kurz Special nozzle Ø1.8mm / 60° short Rund-Düse Ø4.5mm Round nozzle Ø4.5mm Spez-Düse Ø1.8mm / 60º lang Special nozzle Ø1.8mm / 60° long Rund-Düse Ø5.5mm Round nozzle Ø5.5mm Flachdüse 20mm Flat nozzle 20mm Verteilerstücke / Distributor Rund-Düse Mehrloch Round nozzle Multihole SDK-12.5/90º Spez-Düse Ø1.8mm / 90º kurz Special nozzle Ø1.8mm / 90° short Quatro-12.5 Quatro-Verteilerblock Quatro distribution block

Open the catalog to page 5

Zubehör / Accessories M-SW16 Mutter SW16 Nut SW16 Ring 12.5 O-Ring 1/4” O-ring 1/4” S-11/16 Sechskantschlüssel Hexagon wrench Spezialanfertigung / Customized products Können auf Kundenwunsch gefertigt werden Can be produced by re

Open the catalog to page 6

Set PCL-1/4 SET 1 CoolingLine Starterkit Piranha CoolingLine Startkit in Plastikbox Inhalt: Piranha CoolingLine Starter kit content: 3x Distanzstuck 28.0 mm 3 Spacer 28.0 mm 3x Distanzstuck 43.0 mm 3 Spacer 43.0 mm 3x Distanzstuck 70.0 mm 3 Spacer 70.0 mm 1x Gewindeanschlussstuck 1/4" 1 Threaded connector 1/4” 1x Gewindeanschlussstuck 1/4" NPT 1 Threaded connector 1/4” NPT 1x Gewindeanschlussstuck 1/8" NPT 1 Threaded connector 1/8” NPT 1x Gewindeanschlussstuck M10x1 1 Threaded connector M10x1 1x Gewindeanschlussstuck M12x1 1 Threaded connector M12x1 1x Rund-Duse 0 3.5 mm 1 Round nozzle 0 3.5...

Open the catalog to page 7

All Piranha Clamp GmbH catalogs and technical brochures

PIRANHA CLAMP
12 Pages