Sp y ® pig Tr ansmit ters For the most reliable signal available, the SPY® Pig Transmitter uses low frequency signals to effectively and consistently penetrate a steel pipe wall. We offer numerous transmitter sizes to cover a full spectrum of pipe diameters. Each transmitter is self-contained and travels inside various pigs, attached to versatile brackets, or towed. A hand-held receiver and wand are used to locate the transmitter. SPY TRANSMITTERS have been proven effective in the field for many years. Each SPY® transmitter is designed and built for long reliable service. • Rugged casing is liquid-tight....

Sp y Non-intrusive pig tr acking syste ms ® reliably and consistently track the passage of a pig or pinpoint its location. To locate a pig equipped with a SPY® Transmitter, the SPY® 23 HZ Receive (Pig Tracker Receiver and Wand) registers the changing magnetic field produced by any SPY® Transmitter. When the Transmitter is located, the 23 HZ Receive produces both an audio and visual output. With two standard 9-volt alkaline batteries, the 23 HZ Receive can be powered continuously for approximately 50 hours. Special waterproof wands are available for sub-sea applications, with depths of up to 10,000...

Sp y ® Non-intrusive pig tr acking syste ms SPY® offers two stationary Non-Intrusive Pig Tracking Systems (PTS) when the need for noting the passage of a pig becomes a little less temporary, (i.e.; manpower or distance prevents leap frogging). The model PTS is for use with electromagnetic transmitters and for use with magnet equipped pigs. NON-INTRUSIVE The PTS System is a non-intrusive system that require NO HOLE to be drilled in the pipe. These non-intrusive systems allow for lower installation costs and significantly reduce the overall cost of the monitoring point. This non-intrusive feature...

spy ® Acoustic pig tr acker Sp yp hone ® The SPYPhone ® allows you to listen to any internal pipeline travelers in motion. It is not a geopphone. The pick-up sensors cover a wide range of frequencies from 1Hz – 20KHz. The SPYPhone® also allows the user to set and restrict multiple frequency ranges. The versatile pick-up sensor, which comes with a 3” contact spike, can also be magnetically attached directly to exposed valves or pipes. You may also securely attach the sensor to a steel probe. The 12-volt auto adapter allows you to listen from the comfort of your vehicle. Plug in the full-spectrum...

three ways to use the spyphone ® using the spyphone® sensor with the auto kit Using the Spyphone® sensor on above ground pipe or valves 20’ SPYPhone® Extension Cord SPYPhone® Sensor SPYPhone® Sensor Pipe using the spyphone® sensor in the ground SPYPhone® Sensor Magnetic Base SPYPhone® Pipe SPYPhone Sensor ® SIGNAL INDICATOR TYPE UNIT WEIGHT UNIT DIMENSIONS LxWxH FACTORY WARRANTY DOMESTIC / INTERNATIONAL STANDARDS 9V Battery or 12V Auto Adapter

Minimum Pipe Size Transmitter Length Transmitter Diameter Maximum Hours of Signal Batteries Required Maximum Pickup Range (free air) Ground Cover Depth Pickup Range Maximum Operation Pressure Temperature Range *Minimum Pipe Bend (Medium – High Density Polly Pig) Minimum Pipe Size Transmitter Length Transmitter Diameter Maximum Hours of Signal Batteries Required Maximum Pickup Range (free air) Ground Cover Depth Pickup Range Maximum Operation Pressure Temperature Range *Minimum Pipe Bend (Medium – High Density Polly Pig) * hen calculating pipe bends please reference the pig manufacturer. Additionally,...

WORLDWIDE AVAILABILITY SPY has a worldwide distributor network to ensure that SPY® products are available where and when they are needed. SEE OUR COMPLETE PRODUCT LINE AT SPYINSPECT.COM SPY INSPECTION EQUIPMENT 10507 Ella Boulevard, Suite 100 Houston, Texas 77038 PHONE: 713-681-5837 FAX: 713-681-4838