*mydirectindustry

TUBOFORM C

Product catalog summary

Overview
The TUBOFORM C is a compact and robust table-top machine designed for mobile and flexible use in cutting ring assembly and flaring of pipes. It is suitable for various applications, including hydraulic pipes according to ISO 8434 standards.

Basic Equipment and Features

Compact design for easy mobility and flexibility.
Universal application for cutting ring assembly and flaring (37° SAE, BV-10, ZAKO up to 38 mm pipe OD).
Electronic pressure adjustment available manually or automatically with a tool recognition system.
Short assembly and set-up times for efficient operation.
Adjustable back stroke of the working cylinder to optimize assembly times.
Equipped with batch-size and total piece counters for operational tracking.
User-friendly interface and easy maintenance.

Additional Features and Options

Attachments available for manual and automatic pressure adjustment during cutting ring assembly.
Attachments for 37° flaring (SAE) and 10° flaring (BV-10, ZAKO).

Technical Data

Operating range for outside pipe diameter: Ø 6 - 42 mm (up to 38 mm for ZAKO system).
Maximum thrust power of the working cylinder: 173 kN.
Maximum stroke of the working cylinder: 40 mm.
Thrust speed of the working cylinder: 6.9 mm/s.
Approximate dimensions (WxHxD): 660 x 265 x 515 mm.
Weight of the basic machine: approximately 66 kg.
Connected load: 1.2 kW.

Manufacturer Information
TRACTO-TECHNIK GmbH & Co. KG, located in Lennestadt, Germany, is the manufacturer of the TUBOFORM C. For more information, visit their website at www.pipe-bending-systems.com.

Catalog excerpts

simply smart. Cutting ring assembly and flaring machine PIPE BENDING SYSTEMS │ simply smart.

Open the catalog to page 1

simply smart. Basic equipment and features  Compact and rugged table-top machine for mobile and flexible use  Universally applicable for both, cutting ring assembly and flaring both (37° SAE, BV-10, ZAKO up to 38 mm pipe OD)  Electronic pressure adjustment, manually or automatically (for use with tool recognition system)  Short assembly times of only few seconds  Short set-up times for tooling when changing the pipe diameter or the working method  Adjustable back stroke of the working cylinder for optimization of assembly times  Batch-size counter and total piece counter  Operator-friendly...

Open the catalog to page 2

All Pipe Bending Systems GmbH & Co.KG catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list