GP Series

GP Series

GP Series

Product catalog summary
Overview: The GP Series by Printed Motor Works is a range of totally enclosed DC motors with an ultra-slim pancake profile, utilizing flat armature technology. These motors are designed for cost-effective servo applications and general-purpose use. They are available in three armature diameters: 9cm, 12cm, and 16cm, with two magnet variants: standard ferrite (GPM) and high-power neodymium (GPN). Additionally, two armature winding options are offered: parallel low resistance (LR) for higher speed and standard series for higher torque.
Specifications: The motors offer a low profile, zero cogging, rapid acceleration, low inertia, high instantaneous and peak torque, no torque drop-off at speed, ultra-slow creep capability, wide speed range, low inductance, long brush life, and are controllable with servo amplifiers. Design options include custom shafts, encoders, gearboxes, and pulleys. They are also available as open motors for full application integration.
Performance Data: The GP Series motors have a peak torque range of 100 to 1700 Ncm, continuous torque from 10 to 170 Ncm, power output between 38 to 533 Watts, and speed capabilities from 1 to 6000 rpm.
Applications: These motors are suitable for servo mechanisms, motion control, industrial robots, CNC machining, printing machinery, centrifuges, logistics solutions, medical mobility, medical scanners, flight simulators, marine autopilots, and high ambient temperature ventilation.
Markets: The GP Series serves various sectors including industrial automation, automotive, medical, life sciences, aerospace & defense, printing, logistics, instrumentation, test and measurement, oil & gas, and offshore marine.
Design Modifications: Options include encoders, customized shafts, timing pulleys, EMC suppression, long leads, connectors, tri-rated cable, operation in 150°C ambient, open/kit option, and mounting customization.
Encoder Options: Standard encoders provide 500 counts per revolution with optical type and a supply voltage of +5V. This standard applies to both GPM and GPN models, including LR versions. Other resolutions and differential/line driver output versions are available upon request.
Suggested Drives: The document suggests PWM24/10 and PWM24/25 for basic motor speed control (6-30Vdc), JUNUS for general speed control applications (20-180Vdc), and ACCELNET for general servo applications (20-180Vdc).
Notes: The voltages mentioned are examples and not predefined limits. Data is subject to change due to ongoing product improvements.
See more

Catalog excerpts

GP Series-1

Peak Torque Cont. Torque The Printed Motor Works GP series is a totally enclosed DC motor in an ultra slim pancake profile. Incorporating flat armature technology, these pancake motors can provide a cost effective servo capability and are ideal for general purpose applications. Two variants of magnet are available for 9cm, 12cm, and 16cm armature diameters: standard ferrite (GPM) and high-power neodymium magnets (GPN). There are also two variants of armature winding for each size: a parallel low resistance (LR) winding which offers more speed, and a standard series winding which offers more torque. Power Torque Speed Voltage Current Cont. Stall Diameter Depth Dept Current Encoder Specific benefits Zero cogging Rapid acceleration High Instantaneous torque High peak torque No torque drop-off at speed Ultra slow creep capability Wide speed range Long brush life Controllable with servo Design options include custom shaft, encoders, gearboxes Available as an open motor for full application integration Standard Motor Encoder Option Printed Motor Works Limited Newman Lane, Alton Printed Motor Works

 Open the catalog to page 1
GP Series-2

Servo mechanisms, motion control, industrial robots, CNC machining, printing machinery, centrifuge, logistics solutions, medical mobility, medical scanners, flight simulators, marine autopilots and high ambient temperature ventilation. Industrial automation, automotive, medical, life sciences, aerospace & defence, printing, logistics, instrumentation, test and measurement, oil &gas and offshore marine. Design Modifications Timing pulleys Long leads Tri-rated cable Open/kit option Customised shafts Rated for operation in 150°C ambient Mounting customisation Standard Encoder Option: Note: Standard...

 Open the catalog to page 2
GP Series-3

NOTE: The above voltages are examples, not a predefined maximum or minimum. Due to ongoing product improvements data is subject to change without notice. Printed Motor Works Limited Newman Lane, Alton Printed Motor Works

 Open the catalog to page 3
GP Series-4

NOTE: The above voltages are examples, not a predefined maximum or minimum. Due to ongoing product improvements data is subject to change without notice. Printed Motor Works Limited |)Printed MotOf WOfkS Newman Lane, Alton

 Open the catalog to page 4
GP Series-5

NOTE: The above voltages are examples, not a predefined maximum or minimum. Due to ongoing product improvements data is subject to change without notice. Printed Motor Works Limited fjPrinted MOtOr WOrKS Newman Lane, Alton

 Open the catalog to page 5

All Pinted Motor Works catalogs and technical brochures

  1. XR20/12

    1  Page

  2. XR32 Series

    4  Pages

  3. GPG12 Series

    4  Pages

  4. GPG9 Series

    3  Pages

  5. GR Series

    3  Pages

  6. GN Series

    3  Pages

  7. GM Series

    4  Pages

  8. GPM16LR

    2  Pages

  9. GPN9LR

    2  Pages

  10. GPN12LR

    2  Pages

  11. GPN16LR

    2  Pages

  12. GPM12LR

    2  Pages

  13. GPM9LR

    2  Pages

  14. GPN12

    2  Pages

  15. GPN9

    2  Pages

  16. GPM16

    2  Pages

  17. GPM12

    2  Pages

  18. GPM9

    2  Pages

  19. IR16 Series

    2  Pages

  20. IR9 Series

    2  Pages

  21. XR15 Series

    4  Pages

  22. PMC Drives

    2  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.