MH Slotting Series Insert Holder
2Pages

duMONT CNC Indexable Broaching System MH Slotting Series Insert Holder The line of tools illustrated here was developed for use on motorized slotting machines for CNC lathes. With the line of tools for motorized slotting machines, it is possible to use the inserts of standard lines for keyway seatings, for hexagonal profiles and for square profiles. It is also possible to manufacture tools and inserts for special profiles. The technical data table does not include the measurements for the diameter and length of the side designed for clamping inside the motorized slotting machine, as these measurements are defined case by case based on customer demands. The picture below is provided by way of example and illustrates one of the many possible shapes that the tool legs can have. L2 L4 MH 35 / 50 / 65 Slotting Series Insert Holder EDP No. Centering Plate Torx driver Mounting screw See pages 55-57 for accessories. See pages 43-44 for inserts Pilot Precision Products | 15 Merrigan Way | South Deerfield, MA 01373

duMONT CNC Indexable Broaching System MH Square Series Insert Holder MH 35 / 50 / 65 Square Series Insert Holder EDP No. Centering Plate Torx driver Mounting screw *please allow 2-4 weeks for delivery. See pages 55-57 for accessories. See page 46 for inserts. Pre-Hole Diameter = Square Thickness X 1.050 For example, for a square with a thickness of 10mm, the diameter of the pre-hole will be: 10mm x 1.050 = 10.50mm To execute completely square holes, the customer will need to make a specific request and will be supplied with an ad hoc tool. In addition to this, in many other cases, to obtain...