Catalogue FORMWORK
56Pages

VERTICAL FORMWORKS

INDEX Minimag P300 Magnum 2.0 Svelt Maximix Retaining walls Climbing systems Shaft platform Special formworks

Company | Projects | Products MINIMAG FORMWORKS FOR VERTICAL CASTINGS Modular and light weight formworks in steel, quick to assemble; they can be moved even manually and they are very flexible in their application. They are particularly suitable for sites where adequate lifting means are not available and for small-medium companies operating in the residential, industrial and roadway sectors. It is ideal for works where productivity and handiness are required. Frame: height 120 mm, finishing: hot-dip galvanized. The MINIMAG formworks belong to Class 7 according to prEN 15113-1 standards....

Company | Projects | Products STRENGTHS • The standard weight of the panel is 34 kg/m2 and it allows manual handling without the need to use lifting equipment. • To assemble MINIMAG panels it is necessary to use: - only 2 contrast tie-rods for casting up to 3.0 m in height with pressures of 60 kN/m2. This allows reducing significantly reinforcement and dismantling times, it allows operating easily and safely because personnel can perform all operations on the ground without the need to “climb on the formwork” or to use ladders (the upper bar is placed at 2.10 m in height). - 2 connection...

CONNECTION CLAMP It is possible to reinforce and dismantle the connection clamp using a simple hammer. MINIMAG Reduced reinforcement and dismantling time using only 2 contrast tie-rods. MINIMAG panels assembly diagram.

Company | Projects | Products Adjustable clamp connecting plywood rods up to 150 mm and MINIMAG panels to the MAGNUM system. Reinforcement of inclined bearing walls with DW15 adjustable plate. Reinforcement of inclined bearing walls with DW15 wing nut.

ACCESSORIES Panels for casting of pillars adjustable from 20 cm to 75 cm at intervals of 5 cm. The mounting holes of the bar are arranged directly on a steel blade, which allows the quick choice of size and it ensures the lifetime of the product. The unused holes are sealed using a PVC plug with ø of 24 Pillar tie-rod Angular panels to create corner nodes.

Company | Projects | Products STRIPPING CORNER WITH THREAD With this new product, it is possible to detach the whole core formwork from the concrete wall and lift it by crane to the next level. The main features of this product are: • these corners can be stacked vertically together • the striking of the complete formwork is localized at corner positions • there is no negative impression on the concrete surface • the whole inner formwork of the core can be lifted in one phase They can be connected to the formwork panels with clamps or bolts, in any case the maximum pressure allowable on the...

PANEL CHARACTERISTICS connecting accessories multi-layer characteristics use per multilayer side (general data) formwork capacity element weight manual handling special panel for pillars CONSUMABLE MATERIALS PVC caps CHARACTERISTICS OF MATERIALS To ensure high quality standards and durability, MINIMAG frames are hot-dip galvanized. The multi-layer panel has a thickness of 15 mm with phenolic surface film (220 g/m2). It consists of 11 layers of birch and it has no moisture absorption when the panel is protected. The edges are protected with paint and they can be used about 50 times per side....

Company | Projects | Products EXAMPLES OF COMBINED APPLICATIONS A particular application for casting of straight and curved bearing walls with variable radius. In the event of castings of combined bearing walls, it is possible to use standard MINIMAG panels with the addition of some traditional components, making sure to choose the MINIMAG panels with the most suitable undersizes. For an exposed concrete finish, it is sufficient to line the formworks using 4 mm plywood sheets.

Company | Projects | Products P300 It is a universal modular formwork system suitable for any type of site where vertical structures cast on site must be built. P300 panels are the best compromise between productivity and overhead cost savings. They are simple and sturdy and thanks to their modularity they are suitable both for small medium-size sites and for large ones to build walls, bearing walls, pillars, single sided walls, plinths, and concrete pier caps. Frame: height 100 mm, finishing: hot-dip galvanized. APPLICATIONS • foundation plinths and curbs • pillars • bearing walls and...

CHARACTERISTICS Base panel sized 100x300 cm is equipped with a few simple accessories, such as a quick connection block that allows quick handling and assembly. The frame is painted and the counter-casting surface consists of a Finnish plywood panel, 18 mm thick, that ensures high number of reuses. It is available in the following sizes: AVAILABLE SIZES H 300 cm adjustable panel for pillars *on request Panels can be used both vertically and horizontally. The P300 connection block allows connecting staggered panels for casting over sloped surfaces with steps. Stop footing

Company | Projects | Products STRENGTHS • high panel modularity and great versatility of use • panels can be used both vertically and horizontally • wide availability of undersized panels, tie rods and plywood panels to obtain proper centering • the panels can be reinforced when inclined, maximum inclination angle 7 degrees • wide range of accessories for every need (angular hinges, service brackets, panel sealing, support brackets, contrast beams) • four different options to reinforce the corner nodes according to the needs of the site • containers for P300 panels for quick and safe...

CONNECTION SYSTEM The P300 connection clamp ensures quick assembly and perfect alignment of formworks Spacing: 1 clamp every 1.5 m2. Advantages: • quick assembly and disassembly • alignment and perfect panel coplanar joint, ease of use in any situation • it is sufficient to apply a hammer blow from top to bottom to close the clamp. Formwork installation. P300 panels can be reinforced when inclined, both vertically and horizontally up to a maximum inclination of 7° respect to the vertical line. Horizontal panels with plywood alternated between panels are used for greater inclinations. Tie...