Catalog excerpts
PLUG-IN DISPLAY FOR TRANSMITTERS WITH 4-20 MA OUTPUT DESCRIPTION ANZ 200 is a plug-in display compatible with any transmitter equipped with an industry standard DIN 43650A connector powered from the 4-20 mA loop. Graphics bright OLED display features measurement reading scaled according to user’s preferences and units, as well as provides access to archive cHART®s for the last hour, day, month and quarter. ANZ 200 is a versatile instrument that is very easy to install, as it just plugs in between the transmitter and it’s connector and does not require any power supply, and easy to use due to it’s intutive on-screen menu. Optionally, it can be equipped with a PNP switch output with configurable set points, and trigger modes. SPECIFICATIONS Compatibility: 4-20 mA transmitters with DIN 43650А connectors Power: powered from the 4-20mA loop, no extra power supply needed Display: graphics OLED, 320 / 310° rotatable in 2 axis Range: -1999...+9999 Features: min/max values, selectable units and decimal point, archive cHART®, averaging Ingress protection: IP65 Optional: PNP switch output APPLICATIONS Local measurement reading Laboratory equipment Control and alarm switching Test rigs Peak values monitoring * does not hinder transmission via HART® when attached to a HART®-enabled transmitter (4 ... 20 mA/HART® output signal) Appearance, mounting kit contents and/or specifications are subject to change without prior notice. We are constantly working on further improvement of our products. Delivery is subject to standard terms of delivery. © 2020 Piezus Page 1. Version: 11.0 Date: 20.05.2020
Open the catalog to page 1TECHNICAL SPECIFICATIONS PERFORMANCE Displayed values range Accuracy Settling time Responce time * Accuracy includes non-linearity, hysteresis and non-repeatability. OPERATING CONDITIONS Ambient temperature Storage temperature Vibration resistance Shock resistance MECHANICAL SPECIFICATIONS Housing material Electrical connection Housing ingress protection Overall dimensions, max Weight, max DIGITAL DISPLAY Indicator type Values displayed ELECTRICAL SPECIFICATIONS Power, max Supply Input and output parameters Input signal Analog output Output signal Relay output Number of relays outputs Type...
Open the catalog to page 2FRONT PANEL ELEMENTS There are two control buttons on the front panel of the device, (UP) and (DOWN), They allow toggling through the data display variations available. Press both control buttons simultaneously to enter setup mode; do the same to save the values changed when done setting up. Press and hold the buttons simultaneously to return to the previous screen or exit the setup mode. MIN and MAX values measured Switch output R - on Measured value Measured value Data display variations examples APPLICATION CONNECTIONS Pressure transmitter Controller with display mA Page. 3. Version:...
Open the catalog to page 3OUTPUT SIGNAL 4...20 mA / 2-wire (standard) А other (specify when ordering) Х ELECTRICAL CONNECTION FROM TRANSMITTER‘S SIDE DIN 43650А other (specify when ordering) ELECTRICAL CONNECTION FROM CONNECTOR‘S SIDE NUMBER OF SWITCH OUTPUTS DIN 43650А other (specify when ordering) bar mbar MPa kPa Pa kg/cm2 mH2O mmHg % °C mA other (specify when ordering) Standard (IP65) other (specify when ordering) Page. 4. Ordering code. Version: 11.0 Date: 20.05.2020
Open the catalog to page 4All PIEZUS catalogs and technical brochures
-
ANZ 3420 G
5 Pages
-
ALZ 3824
5 Pages
-
ALZ 3822
5 Pages
-
ALZ 3920
4 Pages
-
ALZ 3742
5 Pages
-
ALZ 3740
5 Pages
-
ALZ 3821
5 Pages
-
ALZ 3820
5 Pages
-
ALZ 3721
5 Pages
-
ALZ 3720
5 Pages
-
ASZ 3410 p
7 Pages
-
ASZ 3420 p
7 Pages
-
ASZ 3410 r
8 Pages
-
ASZ 3420 r
8 Pages
-
APZ 2410 a
5 Pages
-
APZ 2422
5 Pages
-
APZ 2412
5 Pages
-
APZ 3020
7 Pages
-
APZ 3230
8 Pages
-
APZ 3240
6 Pages
-
APZ 3410
8 Pages
-
APZ 3420 s
8 Pages
-
APZ 3420 m
8 Pages
-
APZ 3421
8 Pages
-
APZ 3420 x
6 Pages
-
APZ 2030
5 Pages
-
APZ 3420
9 Pages
-
AMZ 5450
7 Pages
-
ANZ 3410 G
5 Pages
-
APZ 2410
5 Pages
-
APZ 2422 а
5 Pages
-
ALZ 3925
4 Pages
-
AMZ 5050
7 Pages