Catalogs >
piezosystem jena GmbH >
Stack type actuators series P/S

Stack type actuators series P/S
3Pages

Catalog excerpts

P/S Series Stack type actuators Concept: The actuators of the P/S series are based on multilayer stack type actuators without lever transmission. Depending on the model, actuators are available with a stroke of 18 µm up to 70 µm. They have a hermetically sealed housing. The special housing allows for the use in aggressive and humid environments. Due to the hermetic insulation, a longer lifetime is achieved. Image: P/S Series Specials: The P/S series actuators are only pre-loaded by the housing. These actuators can handle, depending on the ceramic size, loads up to 3400 N. The construction of the housing tightly encloses the stack, thereby avoiding any mechanical play. Interfaces: The M3 thread in the bottom plate allows for easy adaptation into existing systems and guarantees exact positioning. The spanner flats on the bottom plate can also be used for mounting. During installation and use, it is important not to subject the actuator tip to non-axial forces. Product highlights: hermetic insulated stack type actuator applications in aggressive and humid environments (up to IP68) integrated mechanical pre-load very small and compact design motion up to 70 µm high stiffness up to 189 N/µm Applications: use under very special conditions valve technology automatization

Open the catalog to page 1

P/S Series Technical data: P/S Series resonant frequency*** blocking force*** operating voltage stainless steel 0.8m; without connector, color coded wires cable length spanner flats typical value measured with NV 40/3 amplifier typical value for small electrical field strength please see “piezoline” on our website

Open the catalog to page 2

P/S Series Technical data: P/S Series according to standard IP68 resonant frequency*** blocking force*** cable configuration length: 1m with connector LEMO 0S.302 spanner flats * typical value measured with NV 40/3 amplifier ** typical value for small electrical field strength *** please see “piezoline” on our website series P/S according standard IP 68 example: P 50/S13 (P-755-09) Rights reserved to change specifications as progress occurs without notice! Tel: +49 (3641) 66880 • U.S. (+1) 508 634 6688 info@piezojena.com • http://www.piezosystem.com P-S_ds_Rev04_2012_06_29.doc

Open the catalog to page 3