*mydirectindustry

PosiCon 1000

Product catalog summary

Concept:
The PosiCon 1000 is a voltage amplifier designed for use with Piezocomposite Actuators that have position control capabilities. It features an integrated SG-amplifier, allowing for position control when used with actuators equipped with an SG sensor. The system can also operate actuators without an SG sensor if the feedback system is disabled.

Special Features:
The PosiCon 1000 includes a single or three-channel version, with both sensor and piezo voltage signals recordable via BNC plugs located on the front and rear sides.

Product Highlights:

Position control capability
Output current of 8 mA
Noise level approximately 1 mVpp

Application Examples:
Suitable for various positioning tasks.

Technical Specifications:

Output Voltage: -200 to +1000 V
DC-offset Range: -200 to +1000 V
Gain: 100 at "att"=0.5 / 200 at "att"=1
Max Output Current: 8 mA
Signal Noise: ≈1 mVPP with capacitive loads ≥100 nF
Input Voltage Range: -2 to +10 V at "att"=0.5 / -1 to +5 V at "att"=1
Input Resistance: 10 kΩ
Monitor Output Voltage Range: 0 to +5 mV (sensor), -2 to +10 mV (piezo voltage)
Mains Voltage: 230/115 V AC ±10% at 50/60 Hz
Dimensions: 260 x 320 x 160 mm (10.3 x 9.1 x 6.3 inches)

Additional Information:
Specifications are subject to change without notice as progress occurs.

Catalog excerpts

PosiCon 1000 Voltage amplifier with integrated position control Positionierer The  PosiCon 1000 is designed for the use with Piezocomposite Actuators with position control. Specials: The PosiCon 1000 has an integrated SG-amplifier. Piezocomposite Actuators with a SG sensor can be driven with position control. If the feedback-system is turned off Piezocomposite Actuators without an SG sensor can also be driven with the PosiCon 1000. Product highlights: Mounting: The PosiCon 1000 comes as single- respectively three-channel version. Booth the sensor and the piezo voltage signal can be recorded via a BNC plug on the front respectively rear side. Position control

Open the catalog to page 1

Rights reserved to change specifications as progress occurs without notice! phone: +49 (3641) 66880 • fax: +49 (3641) 668866 [email protected] http://www.piezosystem.com/piezocomposite/

Open the catalog to page 2

PosiCon 1000

PosiCon 1000

Catalog excerpts

All Piezosystem jena GmbH catalogs and technical brochures

Archived catalogs