PKS 1 Mirror tilting system Positionierer The mirror tilting system series PKS 1 has been developed for fast and fine mirror adjustment. Available for ½-inch and 1-inch mirrors, the system is designed for flexible use. Especially for laser beam stabilization the series PKS 1 can be integrated into the beam line easily. The compact design and the high stiffness are perfect for dynamic applications. Laser beam steering can be realized in near real Product highlights: Specials: The piezo driven range of fine adjustment of 1 mrad can be offset in a range of ±2° by using the fine-thread thumb screws. The controlling voltage range is +130 V. The series PKS 1 is adaptable to vacuum conditions. compact design orthogonal tilting axes high stiffness adjustment range 1 mrad Application examples: Mounting: The stage body can be mounted using screws to affix it. Two holes for M4 screws are located in the stage body. A ½-inch mirror (Ø12.7mm) for the PKS 1-½” and a 1-inch mirror (25.4mm) for the PKS 1-1” can be easily mounted on the system by using the set screw or they can be glued directly. laser technology beam alignment scanning systems fine adjustment of optical mirrors vacuum version

Product name Technical data Unit tilting angle piezo drive open loop tilting angle manual resolution open loop** resonant frequency @ 10 g dimensions (w x h x d) stainless steel typical value for small electrical field strength The resolution is only limited by the noise of the amplifier and metrology. mirrors are not included