PSH 4/1 1-axis mirror tilting platform Concept: The PSH 4/1 is a product addition in our series of piezo electrically driven mirror-tilting platforms. The PSH 4/1 was developed with an unloaded resonant frequency of more than 6.5 kHz, as an ultra fast scanning system for the highest of frequencies. This system is uniquely designed with outside dimension of 12 mm diameter and only 20 mm height, The PSH 4/1 can be easily integrated into any of your existing systems. These special features make the PSH 4/1 very suitable for applications in the fields of beam steering, laser stabilizing, optics, and telecommunication. Product highlights: Specials: This miniature sized system is based on special high power piezo actuators. They provide a ± tilting with a total travel range of up to 4 mrad. Due to the internal pre-load the system displays a very short settling time and the resonant frequency is greater than 6.5 kHz (unloaded). With its special flexure hinge design (FEA calculated) the system is free of friction and mechanical play. The PSH 4/1 is available in a cryogenic and vacuum version as well. Interfaces: The unique advantage of the PSH 4/1 is the small outer dimension. The system is integrated into a robust housing to avoid damaging. Also on the bottom plate two thread holes exist for mounting the PSH (M2x3 threading). The distance between both threaded holes is 8 mm. Optical components (e.g. mirrors) can be mounted on the top plate directly. smallest piezo scanner available tilting range 4 mrad 1-axis ± tilting platform 6.5 kHz resonant frequency sub-µrad resolution small size Applications: laser alignment laser beam stabilization scanning systems laser beam metrology medical engineering

PSH 4/1 Technical specification: mirror tilting platform resonant frequency (unloaded) voltage range Aluminum/Stainless Steel operating temperature material dimensions (diameter x length) weight typical value measured with piezo controller 30DV50 typical value for small electrical field strength The resolution is only limited by the noise of the power amplifier and metrology **** as an option a 1/20 Wave Flat Fused Silica 0.5" Dia. Enhanced Aluminum can ordered separately ***** additional connector configurations Product name PSH 4/1 Digital Description Version for digital controller series d-Drive...