1. Catalogs
  2. piezosystem jena GmbH
  3. High speed positioner nanoX 240 SG
video corpo

High speed positioner nanoX 240 SG

High speed positioner nanoX 240 SG

High speed positioner nanoX 240 SG

Product catalog summary
Concept: The nanoX 240 SG is a one-axis linear positioning stage designed for high-speed inspection of cylinder heads. It is part of the ultra-fast nanoX® line, optimized through FEA for high dynamic performance and guiding accuracy under heavy loads. The monolithic guidance design with solid flexure hinges ensures a trajectory free from mechanical play and friction. The system is temperature compensated to maintain position despite environmental changes.
Special Features: The stage achieves high positioning accuracy, stability, linearity, and reproducibility in closed-loop operation. It includes a digital amplifier/controller for dynamic setup of PID parameters, slew rate, and notch filter bandwidth. A built-in wobble generator helps identify mechanical resonance, and the notch filter eliminates undesired frequencies. The setup can be adapted based on load scenarios to optimize performance. The nanoX is available in various sizes and deflection angles.
Product Highlights:
  • 240 μm range of motion
  • Integrated position encoder
  • Excellent guidance accuracy
  • High level of dynamics
  • 0.4 nm resolution
  • Beam deflection at different angles
  • Temperature-compensated
Application: Specifically designed for cylinder head inspection systems.
Technical Data:
  • Motion range: 240 μm open loop, 200 μm closed loop
  • Capacitance: 2x2.6 μF
  • Resolution: 0.4 nm open loop, 4 nm closed loop
  • Feedback sensor: Strain gage
  • Repeatability: 10 nm
  • Non-linearity: 0.2%
  • Resonant frequency: 380 Hz unloaded, 200 Hz with 100 g load
  • Stiffness: 0.3 N/μm
  • Voltage range: -20 to 130 V
  • Connector: D-Sub 15
  • Cable length: 2 m
  • Bending radius of cable: 15 mm
  • Operating temperature: -20 to +80 °C
  • Material: Aluminum/Stainless steel
  • Max push/pull forces: 100 N open/closed loop
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

High speed positioner nanoX 240 SG-1

nanoX 240 SG High speed inspection of cylinder heads Concept: The one–axis linear positioning stage nanoX 240 SG is a development within the ultra– fast nanoX®–line. Due to FEA–optimization the stage achieves the highest dynamical performance and excellent guiding accuracy even under high loads. The sophisticated monolithic guidance design of the solid flexure hinges means the trajectory is free from mechanical play and friction, a feature of all psj–stages. Also, the nanoX and nanoSX systems are temperature compensated, while changing the environmental temperature the stage keeps its position. Specials: The highest positioning accuracy, stability, linearity and reproducibility are achieved in closed loop operation. The digital amplifier/controller from piezosystem jena allows additional feature in–situ and dynamical set up of PID–parameters, slew rate and notch filter band width. The mechanical resonance can be found using the built in wobble generator. The notch filter set up eliminates undesired frequencies from the output voltage, such as the stage’s resonant frequency. So you can easily adapt the set up depending on the current load scenario and optimize the performance of the system. The nanoX comes in different sizes and with different deflection angles. Image: nanoX 240 SG 45° (part.–no.: S–632–01D) Product highlights: 240 μm range of motion integrated position encoder excellent guidance accuracy high level of dynamics 0.4 nm resolution beam deflection in different angles temperature–compensated cylinder head inspection system

 Open the catalog to page 1
High speed positioner nanoX 240 SG-2

nanoX 240 SG Technical data nanoX 240 SG resolution open/closed loop*** feed back sensor strain gage voltage range cable length bending radius of cable operating temperature aluminum/stainless steel max. push/pull forces open loop max. push/pull forces closed loop unloaded with 100 g load typical value measured with 30DV50 amplifier ** typical value for small electrical field strength *** the resolution is only limited by the noise of the power amplifier and metrology.

 Open the catalog to page 2
High speed positioner nanoX 240 SG-3

sensor cable * Bewegung [um] 200 / 240 closed loop / open loop * cable length on request customers drawing piezosystem jena

 Open the catalog to page 3
High speed positioner nanoX 240 SG-4

customers drawing p/ezosysfem yens

 Open the catalog to page 4
High speed positioner nanoX 240 SG-7

female connector sensor signal bottom plate - (fixing part) : sample for total cable length customers drawing piezosystem jena Rights reserved to change specifications as progress occurs without notice!

 Open the catalog to page 7

All Piezosystem jena GmbH catalogs and technical brochures

  1. SL 04-Series

    2  Pages

  2. SL 03-Series

    2  Pages

  3. SL 02-Series

    2  Pages

  4. XY Stage

    4  Pages

  5. 24DV40

    3  Pages

  6. PosiCon 1000

    2  Pages

  7. HVP 1000/200

    3  Pages

  8. HVP 300/20

    3  Pages

  9. d-Drive

    2  Pages

  10. ENV

    4  Pages

  11. LCS - Series

    2  Pages

  12. SP-DS Series

    2  Pages

  13. SP-TR Series

    2  Pages

  14. MI-Series

    2  Pages

  15. NMM-1

    2  Pages

  16. EPP-Series

    2  Pages

  17. LM-Series

    2  Pages

  18. Series PA

    4  Pages

  19. series N

    3  Pages

  20. Piezo-Actuators

    27  Pages

  21. Accessories

    2  Pages

  22. PSH25 OEM

    3  Pages

  23. nanoMIPOS 400

    2  Pages

  24. Mikroskopie

    4  Pages

  25. TRITOR 100

    2  Pages

  26. TRITOR 38

    2  Pages

Archived catalogs

  1. General Catalog

    98  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.