Accessories
2Pages

Catalog excerpts

adapter and extension cables piezosystem jena delivers all open loop standard translation systems and positioning stages with a cable length of 1m (approx. 40 inches). Systems with integrated capacitive feed back sensors come with 1.6m cable length. Systems with strain gage feed back sensors have a cable length of 1.2m. Systems which have a part number that is extended by the suffix “E” or “D” come with a total cable length of 2m (80 inches). Please see chapter: “elements with integrated measurement system” page: 71. All systems prepared for vacuum applications are delivered with 0.6m (24.25 inches) polyamid insulated copper wires without connectors for use inside the vacuum. Separate cables with connectors may be included for use outside the vacuum if a power supply is ordered. Airside cable length is 2m (80 inches). piezosystem jena offers a wide range of accessories and adapter cables. Please note, each cable extension, or changing of an existing cable configuration may influence the performance of the system, especially systems with integrated feed back sensors. These systems should be recalibrated after the cable configuration has been changed to keep the full system specification available. piezo voltage piezo voltage piezo voltage (nanoX) piezo voltage (nanoX) external sensor external sensor piezo voltage extension cables piezosystem jena offers a wide range of extension and adapter cables. Please look just the examples given below and use this scheme to give necessary information to order it: intended use piezo voltage external sensor

Open the catalog to page 1

adapter and extension cables adapter and extension cables vacuum option Almost all piezo translators from piezosystem jena can be modified to used in vacuum. The option Z-200-01 is available for vacuum in the range up to 10-7mbar. Option Z-200-02 describes modification for vacuum range up to 10-10mbar. PZT ceramics from piezosystem jena can be baked up to 120°C. Elements with special preparation can be baked out up to 150°C (300°F). All translation stages possess vent holes. The cable length in vacuum is 0.6m, outside vacuum 2m. Special CAPTON cable (Z-005-00) is available upon request. We...

Open the catalog to page 2