The VV series are unregulated DC-DC converters in a low 0.500" profile package footprint with up to 10,000V single output models. They can operate over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. • Output voltage is proportional to input voltage • Wide input voltage range • Through hole mounting • Transformer Isolated modules • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power BLANK = ISOLATED -P = NON-ISOLATED POSITVE OUTPUT -N = NON-ISOLATED NEGATIVE OUTPUT

Note 1: Tested at maximum input voltage and full output load. Note 2: Maintain minimum 5% of rated load to prevent a voltage surge. Note 3: For <900V output models, a 0.1|_iF, 2kV high quality ceramic capacitor is required across the output. Note 4: Unit is capable of sourcing max output current over the entire output voltage range. Note 5: For <5000V output models, input ground and output ground are not connected internally. Input terminals and output terminals may be connected externally.

Series VV (100-10kV) High Voltage DC-DCMODEL LIST - >6000V ISOLATED OUTPUT Pico Note 1: Tested at maximum input voltage and full output load. Note 2: Maintain minimum 5% of rated load to prevent a voltage surge. Note 4: Unit is capable of sourcing max output current over the entire output voltage range. Note 6: For >6000V isolated output models, any input terminals cannot be connected to any output terminals.

Series VV (100-10kV) High Voltage DC-DCMODEL LIST - >6000V NON-ISOLATED POSITIVE OUTPUT Pico Note 1: Tested at maximum input voltage and full output load. Note 2: Maintain minimum 5% of rated load to prevent a voltage surge. Note 4: Unit is capable of sourcing max output current over the entire output voltage range. Note 7: For >6000V non-isolated positive output models, you must provide an external connection only using the COM output terminal to either +IN or -IN input terminals.

Series VV (100-10kV) High Voltage DC-DCMODEL LIST - >6000V NON-ISOLATED NEGATIVE OUTPUT Pico Note 1: Tested at maximum input voltage and full output load. Note 2: Maintain minimum 5% of rated load to prevent a voltage surge. Note 4: Unit is capable of sourcing max output current over the entire output voltage range. Note 8: For >6000V non-isolated negative output models, you must provide an external connection only using the COM output terminal to either +IN or -IN input terminals.

Series VV (100-10kV) High Voltage DC-DC SPECIFICATIONS (Max. VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) OPTIONS AVAILABLE – CONTACT PICO FOR PART NUMBER Parameter Referenced Standard Stabilization Bake Referenced Method 1008 Non-operating maximum storage temperature for 24 hours Temperature Cycle Referenced Method 1010 Non-operating at temperature extremes, 15 mins/temp, 10 cycles Referenced Method 1015 Max operating temperature for 160 hours OPTIONS AVAILABLE Expanded Ambient Operating Temperature DATA CURVES (Max. VIN, TA = +25°C, 1 hour warm up unless otherwise...

■o+IN +OUT<^ Note 3: For <900V output models, 0.1pF, 2kV high quality ceramic capacitor is required across the output. Note 5: For <5000V output models, input ground and output ground are not connected internally. Input terminals and output terminals may be connected externally. >6000V ISOLATED OUTPUT MODELS ■o+IN +OUT<^ Note 6: For >6000V isolated output models, any input terminals cannot be connected to any output terminals. >6000V NON-ISOLATED POSITIVE MODELS ■<»+IN +OUT<h Note 7: For >6000V non-isolated positive output models, you must provide an external connection only using the COM output...

Series VV (100-10kV) High Voltage DC-DC MECHANICAL DRAWINGS ≤5000V OUTPUT MODELS 2.250 [57.150] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. INPUT GROUND AND OUTPUT GROUND MAY BE CONNECTED. ≥6000V ISOLATED OUTPUT MODELS 2.250 [57.150] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. INPUT GROUND AND OUTPUT GROUND MUST NOT BE ANYWHERE IN THE CIRCUIT. c. FOR ≥6000V OUTPUT MODELS, OUTPUT IS FLOATING. 2025 REV 1

Series VV (100-10kV) High Voltage DC-DC MECHANICAL DRAWINGS ≥6000V NON-ISOLATED POSITIVE OUTPUT MODELS 2.250 [57.150] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. COMMON OUTPUT MUST BE CONNECTED TO +IN OR -IN INPUT. C. OUTPUT IS POSITIVE. ≥6000V NON-ISOLATED NEGATIVE OUTPUT MODELS 2.250 [57.150] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. COMMON OUTPUT MUST BE CONNECTED TO +IN OR -IN INPUT. C. OUTPUT IS NEGATIVE. 2025 REV 1

Series VV (100-10kV) High Voltage DC-DC BOX PACKAGING - BULK POWER SUPPLY CARDBOARD CARRIER POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations...