The M & MV series are unregulated DC-DC converters with upgraded MIL screened / qualified components and expanded operating temperature range. The epoxy insulated shielded case is in an ultra-miniature encapsulated package - as small as 1.250” x 0.500” x 0.300". Over 100 models are available in both single and dual isolated outputs as well as high output voltages - up to 500V. They can operate over the wide temperature range of -55°C to +85°C without derating, a heat sink or active cooling. • JANTX Diodes • MIL screened transformers, capacitors and resistors • Hermetically sealed transistors • Encapsulated semiconductors, conservatively rated for maximum reliability • Ultra-miniature size - down to 0.300” height • Five-sided or six-sided shielded case • Single and dual isolated output • No heat sink or derating required Contact Pico for part number of available options: Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power • Tighter output voltage tolerances

PICO MODEL LIST SERIES M, SINGLE OUTPUT Note 1: Tested at nominal input voltage and full output load. Note 2: 10pF, 75V high quality low ESR capacitor is required across the output.

PICO MODEL LIST Note 1: Tested at nominal input voltage and full output load. Note 3: 10pF, 75V high quality low ESR capacitor is required across each output.

PICO MODEL LIST

PICO MODEL LIST Note 1: Tested at nominal input voltage and full output load. Note 4: 0.1pF, 1kV capacitor is required across the output. Note 5: Maintain minimum 10% of rated load to prevent a voltage surge.

PICO LSPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)

PICO LSPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)UPGRADED MILITARY QUALIFIED COMPONENTS Component Output: Voltage (VDC) Output: Voltage (VDC) P/N 15M28S @ Nominal VIN (%) Aouapwa (%) Aouapyja

DATA CURVES (Nominal VIN, TA = +25°C, 1 hour warm up unless otherwise specified) P/N 12MV200 @ Max Output Current / Power P/N 12MV200 @ Max Output Current / Power 220 Output Voltage(VDC) (VDC) Output Voltage Output Voltage (VDC) Output Voltage (VDC) P/N 5M24S @ Max Output Current / Power P/N 5M24S @ Max Output Current / Power 31.2 31.2 28.8 4.54.5 5.0 5.0 5.5 5.56.0 Input Voltage Voltage (VDC) Input (VDC) TYPICAL CONNECTION CIRCUIT SINGLE OUTPUTS +IN Note 2: For Series M, a 10µF, 75V high quality low ESR capacitor is required across the output. Note 4: For Series MV, a 0.1µF, 1kV capacitor is...

MECHANICAL DRAWINGS SERIES M SINGLE OUTPUTS .500 [12.700] BOTTOM VIEW BOTTOM VIEW

POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the purchaser. We do not guarantee that the products can be used for a particular purpose...