The M & MV series are unregulated DC-DC converters with upgraded MIL screened / qualified components and expanded operating temperature range. The epoxy insulated shielded case is in an ultra-miniature encapsulated package - as small as 1.250" x 0.500" x 0.300". Over 100 models are available in both single and dual isolated outputs as well as high output voltages - up to 500V. They can operate over the wide temperature range of -55°C to +85°C without derating, a heat sink or active cooling. • JANTX Diodes • MIL screened transformers, capacitors and resistors • Hermetically sealed transistors • Encapsulated semiconductors, conservatively rated for maximum reliability • Ultra-miniature size - down to 0.300" height • Five-sided or six-sided shielded case • Single and dual isolated output • No heat sink or derating required Contact Pico for part number of available options: Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power • Tighter output voltage tolerances 2025 REV 0 www.PicoElectronics.com | Series M & MV&nb

PICO MODEL LIST SERIES M, SINGLE OUTPUT Note 1: Tested at nominal input voltage and full output load. Note 2: 10pF, 75V high quality low ESR capacitor is required across the output.

PICO MODEL LIST Note 1: Tested at nominal input voltage and full output load. Note 3: 10pF, 75V high quality low ESR capacitor is required across each output.

PICO MODEL LIST

PICO MODEL LIST Note 1: Tested at nominal input voltage and full output load. Note 4: 0.1pF, 1kV capacitor is required across the output. Note 5: Maintain minimum 10% of rated load to prevent a voltage surge.

PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) 5-Sided Epoxy Insulated Metal 6-Sided Epoxy Insulated Metal Vacuum Impregnated Epoxy

Series M & MV Low Profile DC-DC SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) UPGRADED MILITARY QUALIFIED COMPONENTS Component Hermetically Sealed, Screened per MIL-S-19500, Table II, JAN TX DESIGNED TO MEET Test Referenced Standard Method 204, Vibration, High Frequency, Condition D Method 213, Shock (Specified Pulse), Condition I Method 106, Moisture Resistance Method 105, Barometric Pressure (Reduced), Condition D OPTIONS AVAILABLE – CONTACT PICO FOR PART NUMBER Parameter Referenced Standard Stabilization Bake Referenced Method 1008 Non-operating...

Series M & MV Low Profile DC-DC DATA CURVES (Nominal VIN, TA = +25°C, 1 hour warm up unless otherwise specified) P/N 5M24S @ Max Output Current / Power P/N 12MV200 @ Max Output Current / Power 220 Output Voltage (VDC) TYPICAL CONNECTION CIRCUIT SINGLE OUTPUTS Note 2: For Series M, a 10µF, 75V high quality low ESR capacitor is required across the output. Note 4: For Series MV, a 0.1µF, 1kV capacitor is required across the output. DUAL OUTPUTS Note 3: For Series M, a 10µF, 75V high quality low ESR capacitor is required across each output. 2025 REV 0

Series M & MV Low Profile DC-DC MECHANICAL DRAWINGS SERIES M SINGLE OUTPUTS .500 [12.700] BOTTOM VIEW BOTTOM VIEW

Series M & MV Low Profile DC-DC BOX PACKAGING - BULK POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the purchaser. We do not guarantee...