Series LAC & TLAC10W Isolated Regulated AC-DC Power SupplyPRODUCT OVERVIEW The LAC series is a linear AC-DC power supply available in single, dual and triple outputs. They offer excellent line and load regulation and very low output ripple - 1mVRMS. The highly reliable module is capable of up to 10W power in a wide ambient temperature range -25°C to +70°C and continuously protected against short circuits. These modules are the perfect design choice for your most stringent industrial applications. The through hole and terminal strip packages have threaded inserts to mount securely for high vibration and shock applications. • Single, dual and triple outputs • Very low output ripple - ImVRMS • Through hole or terminal strip • Continuous short-circuit protection • No external components required BLANK = THROUGH HOLE LAC S = SINGLE OUTPUT D = DUAL OUTPUT A = TRIPLE OUTPUT @ 4.13-4.25W B = TRIPLE OUTPUT @ 5.38-5.50W 2025 REV 0 www.PicoElectronics.com | Series LAC & TLAC 611

AC-DC PICO MODEL LIST Note 3: Auxiliary outputs must be balanced. www.PicoElectronics.com | Series LAC & TLAC

AC-DC PICO SPECIFICATIONS (VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) www.PicoElectronics.com | Series LAC & TLAC

Series LAC & TLAC AC-DC TYPICAL CONNECTION CIRCUIT SINGLE OUTPUT DUAL OUTPUT www.PicoElectronics.com | Series LAC & TLAC

Series LAC & TLAC AC-DC TYPICAL CONNECTION CIRCUIT TRIPLE OUTPUT LOAD -MAIN +AUX MECHANICAL DRAWINGS SERIES LAC - SINGLE OUTPUTS BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. THE RECOMMENDED TORQUE FOR MOUNTING SCREWS IS 3-5 IN-LBS. 2025 REV 0 www.PicoElectronics.com | Series LAC & TLAC

AC-DC PICO MECHANICAL DRAWINGS SERIES LAC - TRIPLE OUTPUTS PIN b. THE RECOMMENDED TORQUE FOR MOUNTING SCREWS IS 3-5 IN-LBS. www.PicoElectronics.com | Series LAC & TLAC

AC-DC PICO MECHANICAL DRAWINGS SERIES TLAC - DUAL OUTPUTS HEI b. THE RECOMMENDED TORQUE FOR MOUNTING SCREWS IS 3-5 IN-LBS. www.PicoElectronics.com | Series LAC & TLAC

Series LAC & TLAC AC-DC MECHANICAL DRAWINGS SERIES TLAC - TRIPLE OUTPUTS BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. THE RECOMMENDED TORQUE FOR MOUNTING SCREWS IS 3-5 IN-LBS. Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu...