Series KR20W Isolated Regulated Low Profile DC-DC ConverterPRODUCT OVERVIEW The KR series is an isolated DC-DC converter with wide input range, tight regulation and six-sided shielded case. These modules have trim and control features. Single and dual isolated output models are standard. They can operate up to 20W over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. • Up to 3.33:1 input voltage range • Six-sided shielded case • Control feature • Trimmable output • Input/output isolation • Single and dual isolated output • No external components required • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power
Open the catalog to page 1PICO MODEL LIST SINGLE OUTPUT Note 1: Tested at nominal input voltage and full output load. Note 2: Line regulation is specified at full output load, nominal to minimum input voltage (-%) and nominal to maximum input voltage (+%). Note 3: Load regulation is specified at nominal input voltage, 60% to 25% load (+%) and 60% to 100% load (-%).
Open the catalog to page 2PICO MODEL LISTDUAL OUTPUT Pico Note 1: Tested at nominal input voltage and full output load. Note 2: Line regulation is specified at full output load, nominal to minimum input voltage (-%) and nominal to maximum input voltage (+%). Note 3: Load regulation is specified at nominal input voltage, 60% to 25% load (+%) and 60% to 100% load (-%). Note 4: Dual outputs must be balanced.
Open the catalog to page 3PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)
Open the catalog to page 4Series KR Low Profile DC-DC TYPICAL CONNECTION CIRCUIT SINGLE OUTPUT DUAL OUTPUT SHUTDOWN ISOLATED Please note: During shutdown mode, 475V input and no load condition, the output voltage may increase up to 5% of nominal output voltage. Shutdown is enabled when SHDN pin is pulled low (<1V) relative to -IN. OPEN will automatically restart the module. When floating, the maximum voltage of SHDN is limited to 22VDC.
Open the catalog to page 5Series KR Low Profile DC-DC MECHANICAL DRAWINGS SINGLE OUTPUT BOTTOM VIEW BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. C IS CONTROL PIN 2025 REV 1
Open the catalog to page 6Series KR Low Profile DC-DC BOX PACKAGING - BULK POWER SUPPLY CARDBOARD CARRIER POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the...
Open the catalog to page 77 Pages
12 Pages
9 Pages
12 Pages
13 Pages
9 Pages
13 Pages
9 Pages
14 Pages
13 Pages
13 Pages
14 Pages
6 Pages
8 Pages
8 Pages
8 Pages
8 Pages
6 Pages
11 Pages
13 Pages
5 Pages
8 Pages
10 Pages
12 Pages
11 Pages
10 Pages
10 Pages
10 Pages
7 Pages
6 Pages
9 Pages
13 Pages
7 Pages
8 Pages
9 Pages
10 Pages
7 Pages
8 Pages
9 Pages
8 Pages
13 Pages
7 Pages
9 Pages
9 Pages
6 Pages
8 Pages
8 Pages
14 Pages
8 Pages
10 Pages
6 Pages
7 Pages
8 Pages
8 Pages
7 Pages
9 Pages
10 Pages
12 Pages
7 Pages
13 Pages
9 Pages
10 Pages
13 Pages
13 Pages
13 Pages
12 Pages
12 Pages
8 Pages