PICO 200W Isolated Regulated High Power DC-DC Converter Electronics, Inc. PRODUCT OVERVIEW The HP series are isolated DC-DC converters with a wide selection of input voltage ranges from 36V to 380V in a low profile full brick size - 4.6" x 2.5" x 0.5". These modules have trim capability and shutdown features. Protections include input overvoltage, output short-circuit, output overvoltage and over temperature. The unique case has integrated side heat sink for better thermal dissipation but is capable of conduction cooling through the baseplate or additional top mounted heat sink. FEATURES • 36V to 380V input range models • Input/output isolation • Parallel operation option • Single and dual isolated outputs • Trim capability • Remote shutdown feature • Fixed operating frequency • No external components required Contact Pico for part number of available options: • Expanded operating temperature: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power • Parallel Operation

Series HP High Power DC-DCMODEL LIST - HPB (36-72V INPUT RANGE)SINGLE OUTPUT Pico Note 1: Maintain minimum 10% of rated load to prevent a voltage surge. Note 2: Tested at nominal input voltage and full output load. Note 3: Line regulation is specified at full output load, nominal to minimum input voltage (-%) and nominal to maximum input voltage (+%). Note 4: Load regulation is specified at nominal input voltage, 50% to 10% load (+%) and 50% to 100% load (-%). Note 5: Dual output loads must be balanced.

Series HP High Power DC-DCMODEL LIST - HPC (100-180V INPUT RANGE)SINGLE OUTPUT Pico Note 1: Maintain minimum 10% of rated load to prevent a voltage surge. Note 2: Tested at nominal input voltage and full output load. Note 3: Line regulation is specified at full output load, nominal to minimum input voltage (-%) and nominal to maximum input voltage (+%). Note 4: Load regulation is specified at nominal input voltage, 50% to 10% load (+%) and 50% to 100% load (-%). Note 5: Dual output loads must be balanced.

Series HP High Power DC-DCMODEL LIST - HPD (200-380V INPUT RANGE)SINGLE OUTPUT Pico Note 1: Maintain minimum 10% of rated load to prevent a voltage surge. Note 2: Tested at nominal input voltage and full output load. Note 3: Line regulation is specified at full output load, nominal to minimum input voltage (-%) and nominal to maximum input voltage (+%). Note 4: Load regulation is specified at nominal input voltage, 50% to 10% load (+%) and 50% to 100% load (-%). Note 5: Dual output loads must be balanced.

Series HP High Power DC-DCSPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) INPUT Note 6: The parallel option allows units to operate the outputs in parallel to share load, increase total power or allow for N+1 redundancy.

Series HP High Power DC-DC PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) DERATING GRAPHS (Nominal VIN, Full Load, Efficiency @ Full Load) Models with Max. Output Power = 200W & Efficiency at full load = 86% Models with Max. Output Power = 200W & Efficiency at full load = 84%

Series HP High Power DC-DC PICO DERATING GRAPHS (Nominal VIN, Full Load, Efficiency @ Full Load) Models with Max. Output Power = 150W & Efficiency at full load = 85% Models with Max. Output Power = 150W & Efficiency at full load = 83% Models with Max. Output Power = 100W & Efficiency at full load = 77% Models with Max. Output Power = 100W & Efficiency at full load = 75% TYPICAL CONNECTION CIRCUIT TRIM TRIM DOWN TRIM DOWN, TRIM Note: Each individual unit will vary slightly. It is recommended to use a 1MO multi-turn trimmer potentiometer to determine resistance value and achieve desired adjustment....

Series HP High Power DC-DC TYPICAL CONNECTION CIRCUIT NOISE REDUCTION TRIM DOWN TRIM Note 7: C1 filter capacitors may reduce noise further. Please contact Pico for more details.

Series HP High Power DC-DC MECHANICAL DRAWINGS ≤48V SINGLE OUTPUT MODELS .500 [12.700] TRIM DOWN SHUT DOWN TRIM DOWN SHUT DOWN 1.800 [45.720] 4.150 [105.410] BOTTOM VIEW BOTTOM VIEW ≥100V SINGLE OUTPUT MODELS .500 [12.700] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. RECOMMENDED TORQUE FOR MOUNTING SCREWS: 6-9 INCH-LBS 2025 REV 1

Series HP High Power DC-DCMECHANICAL DRAWINGSDUAL OUTPUT MODELS .500 [12.700] BOTTOM VIEW NOTES b. RECOMMENDED TORQUE FOR MOUNTING SCREWS: 6-9 INCH-LBS

THERMAL INTERFACE PICO Weight: 145 grams typical

Series HP High Power DC-DC TUBE PACKAGING TUBE PACKAGE TUBE PLUG TUBE PLUG POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the purchaser....