100W Isolated Regulated Programmable High Voltage DC-DC Converter Electronics, Inc. PRODUCT OVERVIEW The HIP series modules are 10% to 100% output voltage programmable by internal reference or external voltage. These modules have an adjustable current limit, voltage monitor, shutdown and operating frequency synchronization features. Protections include input over/ undervoltage, output short-circuit, and over temperature. The 3" x 2" x 0.5" case size has threaded inserts to mount securely for high vibration and shock applications. Conduction cooling is available through the baseplate or compatible heat sink. • 10-100% programmable output feature • Compact 3" x 2" x 0.5" case size • 2:1 input voltage range • Protected against input over/undervoltage, output short-circuit, and over temperature • Frequency synchronization feature • Adjustable output current limit feature • Shutdown feature • Output voltage monitor feature Contact Pico for part number of available options: • Expanded operating temp: -40°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power SERIES NAME 28INPUT VOLTAGE RANGE 500NOM. OUTPUT VOLTAGE 15 = 10 to 20V HIP 100 = 100V

Series HIP High Voltage DC-DCSPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) INPUT

Series HIP High Voltage DC-DCSPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) GENERAL PROTECTIONS & FEATURES

pica SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) OPTIONS AVAILABLE - CONTACT PICO FOR PART NUMBER Models with Max. Output Power = 50W & Efficiency at full load = 87% Models with Max. Output Power = 50W & Efficiency at full load = 86%

Series HIP High Voltage DC-DC TYPICAL CONNECTION CIRCUIT SHUTDOWN Note 1: Shutdown (SHDN) will shut down the unit when the pin is pulled below 1.14V. The unit will restart once the pin reaches above 1.3V. OUTPUT VOLTAGE PROGRAMMING EXTERNAL VOLTAGE INTERNAL VOLTAGE REFERENCE & RESISTIVE DIVIDER Note 2: Output Voltage Programming (VPROG) can program the output voltage 10 to 100% Vout using 0.5 to 5V range. Linearity is 1% max. for 10 to 100% Vout. Linearity will be >1% from 0 to 10% Vout. Unit requires a voltage ≤ 5VDC at Output Voltage Programming pin to turn on and operate normally. Note 3:...

Series HIP High Voltage DC-DCTYPICAL CONNECTION CIRCUITOUTPUT CURRENT LIMIT PROGRAMMING EXTERNAL VOLTAGE RESISTOR INTERNAL VOLTAGE REFERENCE Note 5: Output Current Limit (ILIM) can adjust the output current limit 20 to 130% of output current. Leave pin unconnected for 130% output current limit. Pull pin to -IN through a resistor for 20% output current limit. Note 6: Frequency synchronization (SYNC) can synchronize the operating frequency of multiple units to the highest operating frequency. The synchronization threshold is 1.4V.

BOTTOM VIEW NOTES b. RECOMMENDED TORQUE FOR MOUNTING SCREWS: 3-5 INCH-LBS

Series HIP High Voltage DC-DC MECHANICAL DRAWINGS HIPTI - THERMAL INTERFACE .002 [.051] BOTTOM VIEW Material Alloy Aluminum Substrate Thermal Conductivity Coefficient of Thermal Expansion, (25-100°C) Brinell Hardness Endurance Limit Standard Thickness HIPCH - HEAT SINK Weight: 51.3 grams typical 2025 REV 1 TOP VIEW www.PicoElectronics.com | Series HIP

Series HIP High Voltage DC-DC BOX PACKAGING - BULK POWER SUPPLY CARDBOARD CARRIER POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the...