Series HILR5W Isolated Regulated Low Profile DC-DC Converter PRODUCT OVERVIEW The HILR series is an isolated DC-DC converter with wide and high input voltage range, tight regulation, low ripple and low profile - 0.500" height. These modules are fully protected from input over/undervoltage, output overcurrent, and over temperature. Shutdown feature, single and dual isolated output models are standard. They can operate over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. FEATURES • Wide input voltage range - 125 to 475V • Down to 0.5% line regulation • Single and dual isolated output • Protected against input over/undervoltage, output overcurrent, and over temperature • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power HILR 28 S SERIES NAME NOM. OUTPUT VOLTAGE NUMBER OF OUTPUTS www.PicoElectronics.com | Series HILR
Open the catalog to page 1Series HILR PICO MODEL LISTSINGLE OUTPUTS Pico Part Output Power www.PicoElectronics.com | Series HILR
Open the catalog to page 2Series HILR PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) www.PicoElectronics.com | Series HILR
Open the catalog to page 3Series HILR Low Profile DC-DC TYPICAL CONNECTION CIRCUIT SINGLE OUTPUT DUAL OUTPUT SHUTDOWN ISOLATED Please note: During shutdown mode, 475V input and no load condition, the output voltage may increase up to 5% of nominal output voltage. Shutdown is enabled when SHDN pin is pulled low (<1V) relative to -IN. OPEN will automatically restart the module. When floating, the maximum voltage of SHDN is limited to 22VDC. www.PicoElectronics.com | Series HILR
Open the catalog to page 4Series HILR Low Profile DC-DC MECHANICAL DRAWINGS SINGLE OUTPUT 1.875 [47.625] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM 2025 REV 0 www.PicoElectronics.com | Series HILR
Open the catalog to page 5Series HILR Low Profile DC-DC MECHANICAL DRAWINGS DUAL OUTPUT 1.875 [47.625] NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM BOTTOM VIEW Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes...
Open the catalog to page 67 Pages
12 Pages
9 Pages
12 Pages
13 Pages
9 Pages
13 Pages
9 Pages
14 Pages
13 Pages
13 Pages
14 Pages
6 Pages
8 Pages
8 Pages
8 Pages
8 Pages
6 Pages
11 Pages
13 Pages
5 Pages
8 Pages
10 Pages
12 Pages
11 Pages
10 Pages
10 Pages
10 Pages
7 Pages
9 Pages
13 Pages
7 Pages
7 Pages
8 Pages
9 Pages
10 Pages
7 Pages
8 Pages
9 Pages
8 Pages
13 Pages
7 Pages
9 Pages
9 Pages
6 Pages
8 Pages
8 Pages
14 Pages
8 Pages
10 Pages
6 Pages
7 Pages
8 Pages
8 Pages
7 Pages
9 Pages
10 Pages
12 Pages
7 Pages
13 Pages
9 Pages
10 Pages
13 Pages
13 Pages
13 Pages
12 Pages
12 Pages
8 Pages