Series FR & SFR1W Isolated Regulated Low Profile DC-DC ConverterPRODUCT OVERVIEW The FR & SFR series are isolated DC-DC converter with tight regulation, low ripple and low profile - 0.300" height. These modules are excellent for applications where the input voltage is constant and the load regulation must be tightly regulated. Single and dual isolated output models are standard. They can operate up to 1W over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. • Down to 0.4% load regulation • Input/output isolation • Single and dual isolated output • No external components required • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Available RoHS Compliant module • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power

PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)SINGLE OUTPUTS Input DUAL OUTPUTS Input Note 1: Tested at nominal input voltage and full output load. Note 2: Dual output loads must be balanced.

PICO SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) PROTECTION & FEATURES Parameter Condition Min. Typ. Max. Units Shortcircuit Temporary

Series FR & SFR Low Profile DC-DC SPECIFICATIONS (Nominal VIN, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) DESIGNED TO MEET Referenced Standard Method 204, Vibration, High Frequency, Condition D Method 213, Shock (Specified Pulse), Condition I Method 106, Moisture Resistance Method 105, Barometric Pressure (Reduced), Condition D OPTIONS AVAILABLE – CONTACT PICO FOR PART NUMBER Standard Stabilization Bake Method 1008 as a guide, Condition B Non-operating maximum storage temperature for 24 hours Temperature Cycle Method 1010 as a guide, Condition B Non-operating at temperature...

Series FR & SFR Low Profile DC-DC MECHANICAL DRAWINGS SERIES FR - THROUGH HOLE SINGLE OUTPUT DUAL OUTPUT BOTTOM VIEW BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM 2025 REV 0

MECHANICAL DRAWINGSSERIES SFR - SUFRACE MOUNT .060 [1.524] LEAD DETAILS

Series FR & SFR Low Profile DC-DC TUBE PACKAGING SERIES FR - THROUGH HOLE SERIES SFR - SURFACE MOUNT 20.000 [508.000] ELEVATION VIEW PLAN VIEW SEALED UNSEALED TUBE PACKAGE TUBE PLUG TUBE PLUG POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty...