Series DC2B
6Pages

{{requestButtons}}

Catalog excerpts

Series DC2B - 1

Series DC2B HIGH POWER DC-DC CONVERTER Hi Input Voltage Range: 700 - 1200 VDC Output Voltages: 5 VDC to 300 VDC Standard Hi Reliability Isolated Regulated Fixed Operating Frequency: 100Khz DC-DC Converter to 300 Watts INPUT VOLTAGE: 700 - 1200 VDC (Input is reverse polarity protected.) Special Output Voltages Available: Consult Factory I <! Regulated Output Voltage: 5 VDC to 300 , VDC Standard Fully Encapsulated i ' TYPICAL FEATURES/ELECTRICAL CHARACTERISTICS , Output Power: 150 to 300 watts (See Chart) : : Output Voltage Ripple: 75-500 mV (See 1 | Chart) Operating Temperature: 0°C to 85°C case temperature. See application notes | for proper thermal considerations. Available with -20°C and -40°C operating temperature range - Consult Factory " ; From Input to DC Output: 4242 VDC |: From Input or DC Output to Case: 2121VDC Current Limit Setpoint: 130% of full load j . Operating Frequency: 100 Khz Fixed UNDERVOLTAGE SETPOINT IS 670VDC (TYP) OVERVOLTAGE SETPOINT IS 1230VDC (TYP) Weight: 340 Grams Typical All dimensions are in Inches NOTE: The torque for mounting screws must be 6 to 9 In-Lbs. Weight: 340 Grams Typical All dimensions are in Inches NOTE: The torque for mounting screws must be 6 to 9 In-Lbs.

Open the catalog to page 1
Series DC2B - 2

* All specifications are typical at nominal (900Vdc) input, full load and 25°C baseplate temperature unless otherwise stated. ** Using proper thermal considerations as outlined in the application notes.

Open the catalog to page 2
Series DC2B - 3

Notes: Pins 6 and 7 for remote sense, not on models with Vout > 48 V CV HEATSINK NOTE: Additional Heatsink options, consult f< Approx. Weight = 145 grams All dimensions are in inches ()=mm Approx. weight = 145 grams

Open the catalog to page 3
Series DC2B - 4

Alloy Aluminum Substrate Thermal Conductivity, (BTU-in/hr ft2 °F) —1530 Coefficient of Thermal Expansion (25-100°C, 10-6 in./in. °F —13.1 Hardness, Brinnell B —23 Endurance Limit, psi. —5000 Standard Thickness (inches) —.002

Open the catalog to page 4
Series DC2B - 5

2.6[2.3] G) If the module with heatsink (CV) is used in free air. EXAMPLE 1: An DC2B-24S module has an efficiency of 81%. What is themaximum ambient temperature if 100 Watts of power is needed? A) In free air: From Table 1: Trca = 4.8 Using relation (2) AT = 4.8 (100) =112.6°C B) In free air with heatsink (CV): T rca =3.3 AT = 3.3 (100)[-gpj— -l] =77.4°C Ta = 85 - 77.4 = 7.6C EXAMPLE 2: What would be the maximum output power for an DC2B-24S module at an ambient temperature of 50°C with an efficiency of 81%? A) If the module is used in free air. From Table 1: Trca = 4.9 Using Relation (2):...

Open the catalog to page 5
Series DC2B - 6

With local sense, Vout is regulated at 12V So, Vout = 12V Vload = Vout -Vwire1 - Vwire2 Vload = 12V - .2V - .2V With remote sense, Vload is regulated at 12V So, Vload = 12 V Vout = Vload + Vwire + Vwire2 Vout = 12V +.2V + .2V = 12.4 Volts The voltage drops in the wires connecting the +V and -V output terminals of the unit and the load depend on the size of the wire )or pcboard trace) and the current flowing through them. For immediate engineering assistance or to place an order: Call Toll Free: 800-431-1064 PICO Electronics, Inc. 143 Sparks Ave. Pelham, NY 10803-1810 Tel: 914-738-1400 Fax:...

Open the catalog to page 6

All Pico Electronics catalogs and technical brochures

  1. HPHA2

    4 Pages

  2. 78000 series

    4 Pages

  3. SERIES SA

    8 Pages

  4. Series LPB

    3 Pages

  5. QP SERIES

    8 Pages

  6. 50AC

    4 Pages

  7. HPHA2

    5 Pages

  8. AC1

    8 Pages

  9. UACHV

    7 Pages

  10. Series UAC

    6 Pages

  11. HiQP SERIES

    9 Pages