50|jH to 20mH, Up to 9.9ARMS Common Mode ChokePRODUCT OVERVIEW Typical applications: • DC-DC Converters • Switching Power Supplies • Communication Interfaces • Aviation Power Systems • Medical Equipment • Lighting Systems Pico's Common Mode EMI Chokes are highly effective in suppressing electromagnetic interference and radio frequency interference, where high-frequency noises are blocked to allow DC and low-frequency AC signals to pass through. These noise suppression devices can be offered in common mode or differential mode operations. They are extremely reliable in the performance of electronic systems where security of data and information are crucial, as well as mechanically durable to the integrity of mission systems. • Extreme resistance to impact, shock, and vibration • Manufactured to MIL-PrF-27 Grade 5, Class S (Except Size 0 which is Class V) • High reliability for space and mission critical applications • Ultra miniature in size and minimalistic design • Design layouts in through-hole, or surface mount • Magnetically shielded (through-hole only) • Terminal solderability per MIL-STD-202, Method 208 Contact Pico for part number of available options: • Screening and qualification criteria to flight standard • Fully RoHS compliant or with exemption 7(a) • Modifications to mechanical design and electrical characteristics • Custom new design and parameters

Common Mode EMI ChokeSPECIFICATIONS - THROUGH HOLE MODELS Note 1: For RoHS compliance on a through-hole component, please consult with Pico's engineer and provide the part number. Note 3: Inductance measured at 0.1VRMS and 10kHz. Note 4: Maximum ambient plus temperature rise is limited 130°C. Note 5: Minimum inductance is 80% of listed value with no maximum value. Note 6: Winding balance at ±1%. www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI ChokeSPECIFICATIONS - THROUGH HOLE MODELS Note 1: For RoHS compliance on a through-hole component, please consult with Pico's engineer and provide the part number. Note 3: Inductance measured at 0.1VRMS and 10kHz. Note 4: Maximum ambient plus temperature rise is limited 130°C. Note 5: Minimum inductance is 80% of listed value with no maximum value. Note 6: Winding balance at ±1%. www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI ChokeSPECIFICATIONS - SURFACE MOUNT MODELS Note 2: All SMDs are available with Pb-free dipped terminals that is compliant to RoHS exemption 7 by requesting part number + '-RoHS-7' Note 3: Inductance measured at 0.1VRMS and 10kHz. Note 4: Maximum ambient plus temperature rise is limited 130°C. Note 5: Minimum inductance is 80% of listed value with no maximum value. Note 6: Winding balance at ±1%. www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI ChokeSPECIFICATIONS - SURFACE MOUNT MODELS Note 2: All SMDs are available with Pb-free dipped terminals that is compliant to RoHS exemption 7 by requesting part number + '-RoHS-7' Note 3: Inductance measured at 0.1VRMS and 10kHz. Note 4: Maximum ambient plus temperature rise is limited 130°C. Note 5: Minimum inductance is 80% of listed value with no maximum value. Note 6: Winding balance at ±1%. www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI ChokeSPECIFICATIONS GENERAL Note 7: Screening and qualification tests are not limited to the options in the chart above. Each standard may also be stringent or exclude certain tests from one another. Please contact Pico for specific application needs and for Pico part number. www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI Choke TYPICAL APPLICATION CIRCUITS EMI COMMON MODE SUPPRESSION INDUCTOR L1 ELECTRICAL SCHEMATIC NOTES a. FOR SIZES A1, A2, AND A3, TERMINALS 3 & 6 HAVE NO CONNECTION. MECHANICAL STABILITY ONLY. 2025 REV 1 www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI ChokeMECHANICAL DRAWINGSTHROUGH HOLE MODELSFIGURE 1 DIAMETER A b. TERMINALS ARE CLOCKWISE FROM PIN #1 c. FOR FIGURE 1, PINS # 3 AND #6 HAVE NO CONNECTION www.PicoElectronics.com | Common Mode EMI Choke Series

LEAD DETAILS Series b. TERMINALS ARE CLOCKWISE FROM PIN #1 www.PicoElectronics.com | Common Mode EMI Choke Series

Common Mode EMI Choke RECOMMENDED LAND PATTERN DIMENSIONS www.PicoElectronics.com | Common Mode EMI Choke Series

CARDBOARD CARRIER

PLAN VIEW ELEVATION VIEW UNSEALED TUBE PACKAGE TUBE PLUG Series INDUCTOR Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico's obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment of our obligations to the purchaser. We do not...