Series C & SC

Series C & SC
1 / 10 PagesView full catalog

Series C & SC

Product catalog summary
Product Overview
The Series C & SC are ultra-miniature, unregulated DC-DC converters with a footprint of 1.24” x 1.12” and a low profile of 0.3”. They offer over 180 models with single and dual outputs, operating efficiently between -25°C to +70°C without the need for a heat sink or active cooling.

Features
  • Up to 4W output at +70°C ambient.
  • Encapsulated semiconductors for maximum reliability.
  • Input voltage range from 5V to 48V, with output up to 48V.
  • 500VDC isolation with 100MΩ insulation resistance.
  • No heat sink or derating required.

Specifications
  • Input voltage ranges from 4V to 50V depending on the model.
  • Operating temperature range is -25°C to +70°C, with storage from -55°C to +125°C.
  • Switching frequency between 20 kHz and 40 kHz.
  • Isolation voltage of 500VDC between input and output.

Environmental and General Specifications
  • Free air convection cooling.
  • Glass reinforced polymer case with vacuum impregnated epoxy potting.
  • Moisture sensitivity level 3 as per IPC/JEDEC J-STD-020.

Protections & Features
  • Temporary short circuit protection.

Compliance and Testing
  • Designed to meet MIL-STD-202 standards for vibration, shock, humidity, and altitude.

Options Available
  • Expanded operating temperature range from -55°C to +85°C.
  • RoHS compliant modules available.

Mechanical Drawings
Includes detailed dimensions for both through-hole and surface mount models, with recommended land pattern dimensions for Series SC.

Warranty
Pico Electronics provides a one-year warranty against defects in materials and workmanship, with limitations on liability for consequential damages.
See more

Catalog excerpts

Series C & SC-1

4W Isolated Proportional Low Profile DC-DC Converter Electronics, Inc. The C & SC series are unregulated DC-DC converters in an ultra-miniature encapsulated package - 1.24” x 1.12” footprint and low profile - 0.3". Over 180 models are available in both single and dual outputs. They can operate over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. • Encapsulated semiconductors, conservatively rated for maximum reliability • Ultra-miniature size - down to 0.300” height • Input/output isolation • Single and isolated dual output • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Available RoHS Compliant module • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power MOUNTING TYPE B = THROUGH HOLE SC = SURFACE MOUNT

 Open the catalog to page 1
Series C & SC-2

Low Profile DC-DC PICOMODEL LIST - SINGLE OUTPUTSERIES C - THROUGH HOLE SERIES SC - SURFACE MOUNT fl—0—0—fr

 Open the catalog to page 2
Series C & SC-3

Low Profile DC-DC PICOMODEL LIST - SINGLE OUTPUTSERIES C - THROUGH HOLE SERIES SC - SURFACE MOUNT - j—g—g—l

 Open the catalog to page 3
Series C & SC-4

Low Profile DC-DC PICOMODEL LIST - DUAL OUTPUTSERIES C - THROUGH HOLE SERIES SC - SURFACE MOUNT Through Note 1: Tested at nominal input voltage and full output load. Note 3: A 22pF, 75V high quality tantalum capacitor is required across each output.

 Open the catalog to page 4
Series C & SC-5

PICO LSPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)

 Open the catalog to page 5
Series C & SC-6

PICO SPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) OPTIONS AVAILABLE - CONTACT PICO FOR PART NUMBER Parameter Output Voltage (VDC) Output Voltage (VDC) Output Voltage (VDC) (%) Aouapiwa (%) Aouapiwa P/N 5C24S / 5SC24S @ Max Output Current / Power P/N 15C48S / 15SC48S @ Max Output Current / Power Input Voltage (VDC) Input Voltage (VDC)

 Open the catalog to page 6
Series C & SC-7

Series C & SC Low Profile DC-DC TYPICAL CONNECTION CIRCUIT SINGLE OUTPUTS Note 2: A 22µF, 75V high quality tantalum capacitor is required across the output. DUAL OUTPUTS Note 3: 22µF, 75V high quality tantalum capacitor is required across each output.

 Open the catalog to page 7
Series C & SC-8

Series C & SC Low Profile DC-DC MECHANICAL DRAWINGS SERIES C - THROUGH HOLE SINGLE OUTPUTS 1.240 [31.496] .300 [7.620] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM 2026 REV 1 BOTTOM VIEW www.PicoElectronics.com | Series C & SC

 Open the catalog to page 8
Series C & SC-9

PICO MECHANICAL DRAWINGS SERIES SC - SURFACE MOUNT LEAD DETAILS NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM

 Open the catalog to page 9
Series C & SC-10

Series C & SC Low Profile DC-DC TUBE PACKAGING ELEVATION VIEW PLAN VIEW UNSEALED TUBE PACKAGE TUBE PLUG TUBE PLUG POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing our product to the original purchaser. This warranty is in lieu of all other warranties, express or implied and constitutes fulfillment...

 Open the catalog to page 10

All Pico Electronics catalogs and technical brochures

  1. 78000 Series

    7  Pages

  2. Series AC

    9  Pages

  3. Series PHA

    12  Pages

  4. Series LP

    13  Pages

  5. Series QP

    11  Pages

  6. Series F/M

    14  Pages

  7. Series HP

    13  Pages

  8. Series LF/LM

    13  Pages

  9. Series P

    14  Pages

  10. Series 5AC

    6  Pages

  11. Series 10AC

    8  Pages

  12. Series 30AC

    8  Pages

  13. Series 50AC

    8  Pages

  14. Series HVP

    6  Pages

  15. Series AVR

    5  Pages

  16. Series HIP

    10  Pages

  17. Series A & SM

    12  Pages

  18. Series B & SB

    10  Pages

  19. Series E & SE

    10  Pages

  20. Series HILR

    6  Pages

  21. Series IR & SIR

    13  Pages

  22. Series JR

    7  Pages

  23. Series KR

    7  Pages

  24. Series LR

    8  Pages

  25. Series M & MV

    10  Pages

  26. Series MR

    7  Pages

  27. Series NR

    8  Pages

  28. Series PLR

    8  Pages

  29. Series UAC

    9  Pages

  30. Series UWD

    8  Pages

  31. Series XP

    10  Pages

  32. Series 37000

    6  Pages

  33. Series 38000

    7  Pages

  34. Series 68500

    8  Pages

  35. Series 69000

    8  Pages

  36. Series 72000

    7  Pages

  37. Series 73000

    9  Pages

  38. Series HCM

    7  Pages

  39. Series Y

    8  Pages

Archived catalogs

  1. Series QP

    13  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.