The AV & SMV series are unregulated DC-DC converters in a low profile package, down to 0.400", footprint with up to 1000V single or dual output models. They can operate over the temperature range of -25°C to +70°C without derating, a heat sink or active cooling. • Output voltage is directly proportional to input voltage • Through hole or surface mount mounting available • Input/output isolation • Single and dual output models • No heat sink or derating required Contact Pico for part number of available options: • Expanded operating temp: -55°C to +85°C Stabilization Bake Temperature Cycle Burn-In • Available RoHS Compliant module • Special Input Voltage, Output Voltage, Isolation Voltage or Output Power • Tighter Output Voltage Tolerance AV = THROUGH HOLE 100 = 100V BLANK = SINGLE OUTPUT SMV = SURFACE MOUNT 200 = 200V D = DUAL OUTPUT

Note 1: Maintain minimum 10% of rated load on each output to prevent a voltage surge. Note 2: For <500V output models, a 0.1|jF, 1kV capacitor is required across the output. For >600V output models, a 0.01|jF, 3kV capacitor is required across output. Note 3: Tested at nominal input voltage and full output load.

Note 1: Maintain minimum 10% of rated load on each output to prevent a voltage surge. Note 3: Tested at nominal input voltage and full output load. Note 4: 0.1|jF, 1kV high quality capacitor is required across each output.

High Voltage DC-DC PICO LSPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified)

High Voltage DC-DC PICO SPECIFICATIONS (Nominal V|N, Full Load, TA = +25°C, 1 hour warm up unless otherwise specified) OPTIONS AVAILABLE - CONTACT PICO FOR PART NUMBER Parameter Output Voltage (VDC) Output Voltage (VDC) Output: Voltage (VDC) P/N 15AV400 / 15SMV400 @ Nominal VIN Efficiency (%) Efficiency (%) P/N 12AV200 @ Max Output Current / Power P/N 24AV1000 @ Max Output Current / Power 2026 REV 1

High Voltage DC-DC TYPICAL CONNECTION CIRCUIT SINGLE OUTPUTS Note 2: For ≤500V output models, a 0.1µF, 1kV capacitor is required across the output. For ≥600V output models, a 0.01µF, 3kV capacitor is required across output. DUAL OUTPUTS Note 4: 0.1µF, 1kV high quality capacitor is required across each output. Safety Note: The high voltage power supplies described in this datasheet generate voltages which can be lethal. They should only be installed and used by personnel who have received the appropriate training and who are fully aware of the hazards that exist. 2026 REV 1

High Voltage DC-DC MECHANICAL DRAWINGS SERIES AV - THROUGH HOLE SINGLE ≥600V OUTPUTS BOTTOM VIEW BOTTOM VIEW DUAL OUTPUTS .500 [12.700] BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. WHITE DOT ON TOP SIDE INDICATES +IN LOCATION 2026 REV 1 www.PicoElectronics.com | Series AV & SMV (100-1k

High Voltage DC-DC MECHANICAL DRAWINGS SERIES SM - SURFACE MOUNT SINGLE ≥600V OUTPUTS BOTTOM VIEW BOTTOM VIEW DUAL OUTPUTS LEAD DETAILS BOTTOM VIEW NOTES a. ALL DIMENSIONS ARE IN INCHES, [ ] = MM b. WHITE DOT ON TOP SIDE INDICATES +IN LOCATION 2026 REV 1 www.PicoElectronics.com | Series AV & SMV (100-1kV)

High Voltage DC-DC RECOMMENDED LAND PATTERN DIMENSIONS SERIES SMV - SINGLE OUTPUTS .130 [3.302] SERIES SMV - DUAL OUTPUTS .130 [3.302] TUBE PACKAGING SERIES AV - THROUGH HOLE .600 [15.240] TUBE PLUG POWER SUPPLY

High Voltage DC-DC TUBE PACKAGING SERIES SMV - SURFACE MOUNT, ≤500V OUTPUTS 20.000 [508.000] PLAN VIEW ELEVATION VIEW SERIES SMV - SURFACE MOUNT, ≥600V OUTPUTS .584 [14.824] PLAN VIEW SEALED ELEVATION VIEW UNSEALED TUBE PACKAGE TUBE PLUG TUBE PLUG POWER SUPPLY Pico warrants each product manufactured by us and sold by us or an authorized representative, to be free from defects in material and workmanship. If properly used, it will perform within its applicable specifications for a period of one year after original shipment. Pico’s obligation under this guarantee is limited to repairing or replacing...