*mydirectindustry

MS-390-5

Product catalog summary

Overview: The document provides technical specifications and operational details for the MS-390-5 Snap-fit mains switching Reed Sensor. It includes electrical, environmental, and mechanical characteristics, as well as ordering information and test procedures.

Specifications:

Contact Rating: Maximum 10 W/VA
Switching Current: Maximum 0.3 A
Operating Temperature: -20 to 85°C
Carry Current: Maximum 1.4 A
Switching Voltage: Maximum 200 VDC / 260 VAC
Breakdown Voltage: Minimum 400 VDC
Total Resistance: Maximum 200 mΩ (initial)

Environmental Characteristics:

Insulation Resistance: Minimum 10⁹ Ω
Switching Frequency: Maximum 400 Hz
Resonant Frequency: Typical 4000 Hz
Operate Time: Maximum 0.6 ms (including bounce)
Release Time: Maximum 0.2 ms
Vibration: 30 g
Shock: 100 g

Features:

Easily mountable and removable without tools or screws
Available in various sensitivity ranges
Customized types available

Ordering Information: Example: MS-390-5-2-0500 describes MS-390-5 with 15 to 20 AT. Packing unit is 25 pieces, with a weight of 6.2 g per piece and 170 g per package.

Test Procedures: The document outlines the test procedures for the final Reed Sensor, including the placement of the test coil and sensor alignment.

Material Information:

Housing: PC black
Cable: UL 1007, AWG 22, 4 mm stripped and tinned black
Potting Compound: Epoxy black

Remarks: The switching distance may reduce when mounted onto ferromagnetic parts. Electromagnetic influences and magnetic fields can alter the sensor's switching behavior. A matching actuator, MSM-390, is available.

Catalog excerpts

MS-390-5 Snap-fit mains switching Reed Sensor Electrical Characteristics Contact form Total resistance max. (initial) Easily mountable and removable as no tools or screws required Contact rating max. Switching voltage max. Magnetical Characteristics (of unmodified Reed Switch) Snap-fit Sensor, mains voltage Various sensitivity ranges available Customized types available Pull in range available Test coil Test equipment tolerance Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Operate time max. (incl. bounce) Operating temperature Environmental Characteristics Ordering Information Packing Unit Standard AT Ranges 2 = 15 to 20 AT 3 = 20 to 25 AT 4 = 25 to 30 AT Ordering Example MS-390-5-2-0500 describes MS-390-5 with 15 to 20 AT. PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany [email protected] www.pic-g

Open the catalog to page 1

PICMS-390-5 Snap-fit mains switching Reed Sensor Material Information Test Parameters Test Procedure of final Reed Sensor Test Coil placed in vertical position Reed Sensor axially centered in Test Coil Reed Sensor pushed into opposite corner of Test Coil Test programs AT range Test program When mounted onto ferromagnetic parts switching distance of MS-390-5 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Matching actuator MSM-390 available as well. PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5...

Open the catalog to page 2

MS-390-5

MS-390-5

Catalog excerpts

All PIC GmbH catalogs and technical brochures