ASSEMBLY LINES PRODUCTIONS SYSTEMS

ASSEMBLY LINES PIBRA's Assembly Lines observe the highest performance, quality and excellence standards, gained over more than 25 years of experience in the market. PIBRA's builds modular Assembly Lines, especially designed for the production of electrical cables and assembly of mechanical/electric components for the automobile industry. Our Assembly Lines can be designed according to each client’s production requirements and specification for the required adaptability to each factory unit. System flexibility enables line cycle and speed adjustment, rapid reference change or the adjustment of...

DYNAMIC ASSEMBLY LINES ASSEMBLY LINES 4

LAD is a line developed according to the start-stop principle for the assembly trays throughout the several working areas. Trays slide on tubular rails in two movement platforms: the higher working platform and the lower tray return platform. Line configuration ensures that components to use for assembly are provided frontally therefore assuring optimal ergonomics for operators. TRAYS STANDARD | 2.2m x 0.8m or 1.8m x 0.6m (please refer to the manufacturer for other dimensions). PROTECTION Protection against edges and tray movement. PRODUSI® Software. (for more information, please refer to the...

The Flat Line is constructed in accordance to the start-stop movement of the assembly trays throughout the several working areas. The sliding movement of the trays is made by lateral guides and the upper work platform and the lower trailing platform. This line is preferably used for large wiring, where there is a need for several trays for a single cabling. The identification of the different functions, through the use of LEDs and adjustments trays, gives a great flexibility of assembly. The Flat Line also has a web platform for monitoring and production management. STANDARD | 2.2m x 0.8m or...

Positioning and interconnection between trays. (Barcode scanning). Association of pre-assembly to the line, with same type of led identification associated with the product. Tray elevation zone. Lower return zone of trays. Routing identification. Position of equipments according to the reference to be produced

The E.Q. line was designed based on the start-stop principle. Product assembly is made by moving between working areas via a conveying canvas. This line offers great benefits from the ergonomic point of view as it allows the front loading of components by operators. In addition, and because area supply is made in line’s posterior region, this equipment increases factory layout improvement. TRAYS Trays of various sizes (depending on the size of the post). PROTECTION Wire protection canvas. CONTROL SYSTEM PRODUSI® Software. (for more information, please refer to the PRODUSI® catalogue). MOVEMENT...

ROTARY ASSEMBLY LINES ASSMBLY LINES

Rotary 7 is a line formed by a dynamic carousel-like structure. Trays move in a controlled way throughout the line. They slide on tubular rails, above ground, under regulable speed. Support and sliding structure, and trays are flexible and modular allowing prompt setup adjustments. TRAYS SIMPLE | DOUBLE (rotary) Length: Min. 2m | Max. 4.5m Width: Min. 0.7m | Max. 1.2m PROTECTION Wire protection canvas. CONTROL SYSTEM PRODUSI® Software. (for more information, please refer to the PRODUSI® catalogue). MOVEMENT Line movement according to the start-stop principle. EMERGENCY SYSTEM EC DIRECTIVES. For...

ROTARY 8 | 18 Rotary 8 | 18 is a line formed by a dynamic carousel-like structure. Trays move in a controlled way throughout the line and fixed in carts which move on the floor (guided by the line's central structure). All the elements are modular allowing prompt setup adjustments. TRAYS SIMPLE | DOUBLE (rotary) Length: Min. 2m | Max. 4.5m Width: Min. 0.7m | Max. 1.2m PROTECTION Wire protection canvas. CONTROL SYSTEM PRODUSI® Software. (for more information, please refer to the PRODUSI® catalogue). MOVEMENT Line movement according to the start-stop principle. EMERGENCY SYSTEM EC DIRECTIVES. For...

ROTARY 11 Rotary 11 is a line formed by a dynamic carousel-like structure. Trays move in a controlled over the defined working areas, by sliding on low-speed rails. Support and sliding structure is flexible and modular allowing prompt setup adjustments. TRAYS SIMPLE | DOUBLE (rotary) Length: Min. 2m | Max. 4.5m Width: Min. 0.7m | Max. 1.2m PROTECTION Wire protection canvas. CONTROL SYSTEM PRODUSI® Software. (for more information, please refer to the PRODUSI® catalogue). MOVEMENT Line movement according to the start-stop principle. EMERGENCY SYSTEM EC DIRECTIVES. For the entire line. INCLINATION...

ROTARY 19 Rotary 19 is a line formed by a dynamic carousel-like structure. Trays move in a controlled way throughout the line, and are fixed in carts which move on the floor (guided by the line’s central structure). The traction zone is aerial and all elements are modular allowing prompt setup adjustments. TRAYS According to the set of specifications or client’s specifications. PROTECTION Wire protection canvas. CONTROL SYSTEM PRODUSI® Software. (for more information, please refer to the PRODUSI® catalogue). MOVEMENT Line movement according to the start-stop principle. EMERGENCY SYSTEM EC DIRECTIVES....

OVERHANG ASSEMBLY LINE CONVEYOR SYSTEM

OVERHANG Overhang is a line created according to the start-stop movement of the assembly trays throughout the several working areas. The tray is suspended in and slides along an electrified rail (EMS – Electrified Monorail System). Several platforms may be placed along this line, in different levels, allowing perfect working area ergonomics. Its high flexibility enables the creation of working areas outside the central line for miscellaneous works like: rework; tray replacement and tray changes or modifications. Tray placement and positioning allows working on both sides, therefore ensuring higher...

DO YOU NEED A COSTUMIZED WIRE HARNESS ASSEMBLY LINE? LET’S TALK! 28