Catalogs >
Phytron GmbH >
Stepper Motors phyBASIC

Stepper Motors phyBASIC
4Pages

Catalog excerpts

phyBASICTM Precision Stepper Motor with High Torque and Smooth Running Our motor series phy BASICTM combines the advantages of a price-optimised design with excellent operating characteristics. That makes the phy BASICTM motors particularly suitable for standard applications in the manufacturing industries. Good running performance, high torque and solid craftsmanship make the phy BASICTM an excellent choice for environments up to IP 40 when it comes to quick precise positioning tasks. Through the 200-step design, the optimised metal sheet cut and the smooth running the motor is also suitable for high precision applications. Combined with our modular motion conth troller phy MOTIONTM, the driver 1 -STEP OTION -Drive (for SIMATIC® ET200® S) or our amplifiers you will receive a perfectly tuned system of high quality motors, power amplifiers and controllers. Through a careful selection of suppliers and our certified quality system (ISO 9001), we make sure that phy BASICTM motors meet our high quality requirements and can be reliably used together with our electronics. You receive accustomed high phytron quality at good prices bundled with our excellent support! More than just a standard With our vast application experience of drives e.g. in paper production or even satellite optics we have the know-how to move your application. To help you find the perfect solution for your project, we offer you the opportunity to realise individual changes on the basis of our motor series. If phy BASICTM or the VSS in vacuum series is not sufficiently adapted to your application, we will develop one of our motors to the “perfect fit“ for your application. RoHS complient In Focus high precision high torque smooth running • 2-phase stepper motors • Holding torques from 50 mNm to 7.2 Nm • Edge dimension from 20 to 86 mm • Number of steps (standard) 200 • Step accuracy 5 % for 1.8° stepper motors • Operating voltage phy BASICTM 20,28,42 (NEMA 8,11,17): 36 to 48 VDC phy BASICTM 56,86 (NEMA 23/34): 72 VDC • Standard connection: 4-lead parallel • Protection class IP 40 • Insulation class B, 130 °C • Insulation resistance 100 MΩ • Operating temperature range -10 to +50 °C (non-freezing) • Cable with mating connector included • Gear • Options/customised Edition 2015 November Extreme. Precision. Positioning.

Open the catalog to page 1

phy BASICTM – data sheet Stepper motor phyBASICTM 20 to 86 (NEMA 8 to 34) F1 Dimensions / Electrical and mechanical characteristics Detent torque Rotor mass inertia Holding torque Inductivity/ Phase Resistance/ Phase Mechanical characteristics Valid for 20°C ambient temperature and atmospheric pressure. axial bearing load push / pull

Open the catalog to page 2

phy BASICTM – data sheet phy BASIC 20-1 / NEMA 8 Half step mode phy BASIC 28-1 / NEMA 11 Torque [mNm] Frequency characteristics Half step mode Half step mode Half step mode Half step mode Half step mode Half step mode phy BASIC 86-2 / NEMA 34 Torque [Nm] phy BASIC 42-3 / NEMA 17 Torque [Nm] Half step mode

Open the catalog to page 3

phy BASICTM – data sheet Connectors and Mating connectors Mating connector Motor Connector on the motor (pin) Housing Crimp contact Wire leads All illustrations, descriptions and technical specifications are subject to modifications; no responsibility is accepted for the accuracy of this information. Ordering code example Motor connection Type Ordering Code Options Edge dimension [mm](NEMA) Ordering code • Cable with mating connector included Phytron GmbH Industriestraße 12 – 82194 Gröbenzell T +49-8142-503-0 F +49-8142-503-190

Open the catalog to page 4