Catalogs >
Phytron GmbH >
Stepper Motor Power Stage CCD+

Stepper Motor Power Stage CCD+
2Pages

Catalog excerpts

Stepper Motor Power Stage with Plain Text Display Technical Information Menu Control and Plain Text Display CCD+ with plain text display, designed for driving 2- phase stepper motors up to 9 APEAK. The step resolution is entered by menu or ServiceBus: From full step to 1/20 step (200 to 4000 steps per revolution with a 200-step type motor). phytron power stages with the addendum + are particularly service-friendly by the ServiceBus which enables configurating, operating and monitoring the power stage via PC. For easy use of all setting options, the free ServiceBus- Comm® for Windows® software is included in delivery. CCD+ can be connected to a DC or AC supply voltage: 70 VDC or 50 VAC. The push-pull inputs are compatible to the RS422 standard: control pulse, motor direction, boost, deselect, reset, deactivation. All inputs and the potential-free open-collector outputs – ready and error – are electrically separated from the power stage supply voltage. A mounting kit for DIN rail or wall mounting in a switching cabinet is included. 93-70 is a stepper motor power stage The CCD+ Power Stage Stepper motor power stage Bipolar control of 2-phase stepper motors Phase currents from 0.14 to 9 APEAK Supply voltage: 50 VAC or 70 VDC Acceptable Ranges: 17 to 50 VAC or 24 to 70 VDC Step resolution up to 1/20 step ServiceBus interface: USB point-to-point ServiceBus-Comm® configuration and operation software for Windows® Inputs compatible to RS422 for safe operation Input logic 5 V or 24 V Menu-driven operation parameter input Plain text display 2 x 6 digits Compact design 70 x 150 x 127 mm Userfriendly screw connectors Fully EMC compliant metal housing Integrated EMC filter for supply voltage DIN rail or wall mounting Prepared for mounting an external 24 V fan ServiceBus-Comm communication software included in delivery Power Stages The CCD+ can be operated by the front side menu buttons or by the ServiceBus via PC. In the SETUP menu the parameters step resolution, run, stop and boost current are programmed and can be changed at any time. The TEST menu allows to drive the motor for test with the programmed parameters, to set the outputs and to display the input states. Active parameters are displayed during motor running: phase current, voltage or power stage temperature (optional). The plain text display changes in case of an error: short circuit, undervoltage or overtemperature. Fig. 1 CCD+ Dimensions in mm Plain text display Menu buttons Stepper motor connector Cable clamps for cable shield connection Inputs / Outputs Supply voltage AC or DC connector Space required for connectors and cables: approx. 30 mm 150 Fig. 2 Front View / Dimensions PE connection ServiceBus connector at the bottom side Technical Information CCD / 08-3 GB

Open the catalog to page 1

Inputs / Outputs / Accessories / ServiceBus-Comm / Ordering Code Ordering Code Input Wiring Diagram Fig. 3 Fig. 4 CCD+ 93-70 MINI - H - 5 Type Peak current Current regulation Motor voltage Step resolution Mounting kit Input level = Stepper motor power stage = 9 A = 4-Quadrant-chopper current control = 70 V = Step resolution 1/1 to 1/20 step = DIN rail mounting kit = Wall mounting kit = 5 V = 24 V CCD+ 9 3 70 MINI H W 5 24 • Accessories Connector set included in delivery Fan 24 VDC Mains transformer 230/115 VAC Power supply unit PS 5-48 Power supply unit PS 10-24 • • • • Control Pulse and...

Open the catalog to page 2