MCC-2
4Pages

MCC-2 Programmable controller for two axes The MCC-2, phytron´s freely programmable dual axis stepper motor controller, is a compact stand-alone unit (CPU, Indexer and power stage) for 2 phase stepper motors providing up to 3.5 APEAK phase current. Controllers in the MCC series have many inputs and outputs (digital and analog) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard. Due to the viariety of available host interfaces (Ethernet, Profibus, USB etc.), the MCC can be quickly and easily integrated into existing applications. This controller is easy to program and can operate either directly (remote) via its host interface or stand-alone (local) with the program routines stored within. Applications As a compact stand-alone device, it convinces expecially in small experimental setups, machines and equipment, which can be dispensed in a PLC. Highlights LabVIEW® LabVIEW® is a simulation software with a graphical interface. Use the VIs (Virtual Instruments) generated by phytron and integrate them in your LabVIEW® project. So you can easily control the MCC from your usual programming environment. LabVIEW® Once programmed the MCC-2 can work without additional PC/controller. As suggested by our customers now with optional Profibus interface! MiniLog-Comm® MiniLog-Comm® is phytron‘s communication software running under Windows® to facilitate programming of the stepper motor controller. It provides quick and easy generation of sequential programs. MiniLog-Comm® software is delivered free with phytron controllers and offers additional functions for test mode, step by step control or single sequence command execution of a motor move, a motor status window and even a Motion Creator. Integrated Driver • 2 axes stepper motor control unit with integrated power stages • Bipolar control of 2 phase stepper motors • Phase currents up to 3.5 APEAK • Power supply 24 to 48 VDC • Step resolution 1/1 up to 1/256 step • Host interfaces: Ethernet, USB, Profibus, RS 485 or RS 232 • Interfaces: - 2 encoders 2 analogue inputs 8 digital inputs and 8 outputs 4 limit switches 2 redundant designed enable inputs • Programming in well-tried MiniLog format, acc. to DIN 66025 or in LabVIEW® • LabVIEW® driver for including the MCC in your LabVIEW® project • Remote or local mode

Specification Mechanical Dimensions (W x H x D) 72 x 127 x 110 mm; 90 x 127 x 110 mm with attached USB converter or terminal adaptor Wall- or rail mounting Features Stepper motors Suitable for the control of 2 phase stepper motors with 4, (6) or 8 lead wiring Supply voltage Controller and motor: 24 to 48 VDC; Limit switches and outputs: 24 VDC Phase current Step resolution 1/1, 1/2, 1/4, 1/5, 1/8, 1/10, 1/20; for smoother motor rotation: 1/32, 1/64, 1/128 up to 1/256 step of a full step Step frequency Hardware error detection • Short circuit (between phase and power supply; between both...

Front View Cable-clamps for shielding connection (top and bottom side) Reset Remote/Local Address switch Analogue inputs e. g. joystick 24 VDC for outputs and limit switches Stepper motor Axis 2 Host interface Stepper motor Axis 1 Limit switch input Inputs for encoder and measuring scale Motor Enable Radiating surface Wall mounting brakets suitable for type M4 or UNC 6-32 screws Block Diagram Motor Enable Motor Enable Monitor Optoc. Axiscontr. 2 UB Power stages Stepper motors Supply for outputs/limit switches 24 VDC / max 4 A Digital I/O (24 V) 8 inputs 8 outputs Limit switches 24 V opener...

MCC-2 with RS 485 Port / Stand-alone Mode / Bus Mode MCC-2 with attached USB Converter and RS 485 Port / Bus Mode Ordering Code Mou ntin g Term inal ada ptor Type Cur rent / Ch opp er Mot or v olta ge Step reso lutio n The variable elements of the product are displayed in colour. Ordering code Options Host interface Ethernet port USB port RS 485/4-wire port RS 485/4-wire + USB converter RS 232 port Profibus port Optional Accessories • • • • Cable assembly Power supply unit PS 5-48 BT 5 operator terminal Mini USB-RS 485 converter Wall mounting With attached clip for DIN rail mounting • A...