MCC-1
4Pages

MCC-1 Programmable controller for one axis The MCC-1, phytron‘s freely programmable dual axis stepper motor controller, is a compact stand-alone unit for 2 phase stepper motors providing up to 3.5 APEAK phase current. Controllers in the MCC series have many inputs and outputs (digital and analogue) and encoder inputs for step position monitoring plus possibilities to connect limit switches all as standard. Due to the viariety of available host interfaces (USB, Ethernet, Profibus etc.), the MCC can be quickly and easily integrated into existing applications. This controller is easy to program and can operate either directly (remote) via its bus or stand-alone (local) with the program routines stored within. Applications As a compact stand-alone device, it convinces expecially in small experimental setups, machines and equipment, which can be dispensed in a PLC. Highlights LabVIEW® LabVIEW® is a simulation software with a graphical interface. Use the VIs (Virtual Instruments) generated by phytron and integrate them in your LabVIEW® project. So you can easily control the MCC from your usual programming environment. LabVIEW® Once programmed the MCC-1 can work without additional PC/controller. All-in-one solution A compact device with controller, I/O and power stage by 55 x 127 x 110 mm MiniLog-Comm® MiniLog-Comm® is phytron‘s communication software running under Windows® to facilitate programming of the stepper motor controller. It provides quick and easy generation of sequential programs. The MiniLog-Comm® software is delivered free with phytron controllers and offers additional functions for test mode, step by step control or single sequence command execution of a motor move, a motor status window and even a Motion Creator. Integrated Driver • 1 axis stepper motor control unit with integrated power stages • Bipolar control of 2 phase stepper motors • Phase currents up to 3.5 APEAK • Power supply 24 to 48 VDC • Step resolution 1/1 up to 1/256 step • Host interfaces: USB, Ethernet, Profibus, RS 485 or RS 232 • Interfaces: - 1 encoder 1 analogue input 8 bidirectional, digital inputs and outputs 2 limit switches 2 redundant designed enable inputs • Programming in well-tried MiniLog format, acc. to DIN 66025 or in LabVIEW® • LabVIEW® driver for including the MCC in your LabVIEW® project • Remote or local mode

Specification Mechanical Dimensions (W x H x D) 55 x 127 x 110 mm; 73 x 127 x 110 mm with attached USB converter or terminal adaptor Wall or rail mounting Features Stepper motors Suitable for the control of 2 phase stepper motors with 4, (6) or 8 lead wiring Supply voltage Controller and motor: 24 to 48 VDC; Limit switches and outputs: 24 VDC Phase current Step resolution 1/1, 1/2, 1/4, 1/5, 1/8, 1/10, 1/20; for smoother motor rotation: 1/32, 1/64, 1/128 up to 1/256 step of a full step Step frequency Hardware error detection • Short circuit (between phase and power supply; between both...

Front View Cable clamps for shielding connection (top and bottom side) Reset Status LED Remote/Local Limit switch Analogue inputs e. g. for joystick Address switch Radiating surface Host interface Stepper motor 24VDC for outputs and limit switches Supply voltage PWR 24 to 48 VDC I/O Inputs for encoder or measuring scale Wall mounting brackets suitable for type M4 or UNC 6-32 screws Motor Enable Block Diagram Motor Enable Motor Enable Monitor Limit switches 24 V opener Stepper motor Axis controller Supply for outputs/limit switches 24 VDC / max 3 A 8 bidirectional digital I/O (24 V) Encoder*...

Configurations MCC-1 with RS 232 Port MCC-1 with RS 485 Port / Stand-alone Mode / Bus Mode MCC-1 with attached USB Converter and RS 485 Port / Bus Mode Ordering Code Mou ntin g Term inal ada ptor Type Cur rent / Ch opp er Mot or v olta ge Step reso lutio n The variable elements of the product are displayed in colour. Ordering code Options Host interface USB port Ethernet port RS 485/4-wire port RS 485/4-wire + USB converter RS 232 port Profibus port Optional Accessories • • • • Cable assembly Power supply unit PS 5-48 BT 5 operator terminal Mini USB-RS 485 converter Wall mounting With...