CONTROL for all Dimensions
80Pages

CATALOGUE STEPPER MOTORS ELECTRONICS CONTROL for all Dimensions phLjIrcm Extreme. Precision. Positioning.

Phytron GmbH Stepper motor technology for special requirements: Stepper motor technology is particularly suitable for precision applications under extreme environmental conditions. Whether vacuum, cryo environment, high temperature or under the influence of radioactivity - the phytron motor series are tough and do precision work, because stepper motors can position very accurately without a fragile feedback encoder. Our control units perform, especially in applications that rely on very precise and smooth running behaviour. We control motors in electron microscopes, accelerator experiments...

Table of Contents www.phytron.eu phLjIrcm Extreme. Precision. Positioning.

POWER SUPPLY Stand-alone units are stepper motor controllers with an intelligent processor. You can execute sequential programs and the unit can operate via Host interface or also stand-alone. MCC-2 LIN Free programmable controller for two axes with linear power stages MCC-1 Free programmable controller for one axis Drives contain so-called indexers and power stages. You put instructions in a programming language to control signals, which boosts the internal power stage. 1-STEP-DRIVE-5A-48V Stepper motor module with integrated power stage for the SIMATIC ET 200®S POWER SUPPLYl Stepper motor...

STEPPER MOTOR ELECTRONICS – Contents POWER SUPPLIES POWER SUPPLY POWER STAGE SPH 240 / 500 / 1013 Power supply for stepper motor power stages and -controllers ACCESSORIES USB-485 Converter Interface converter as stick for Phytron stepper motor controllers and power stage SOFTWARE Our free WINDOWS® programs allow to program, to monitor and to adjust power stages and controllers comfortable and clear via PC. phy LOGICTM ToolBox Development environment for the phyMOTIONTM stepper motor controller ServiceBus-CommTM Communication software for stepper motor power stages

STEPPER MOTOR ELECTRONICS – Contents Phytron GmbH Industriestraße 12 – 82194 Gröbenzell T +49-8142-503-0 F +49-8142-503-190 Catalogue / 11-2016 EN / 4

STAND-ALONE UNITS – Contents STAND-ALONE UNITS Stand-alone Units are stepper motor controllers with an intelligent processor. You can execute sequential programs and the unit can operate via Host interface or also stand-alone. POWER SUPPLY POWER STAGE Free programmable, modular multi axes controller for stepper motors Free programmable controller for two axes Free programmable, linear controller for two axes Free programmable controller for one axis www.phytron.eu Extreme. Precision. Positioning.

INDUSTRIAL Modular multi-axes controller for stepper motors The p/iyMOTION™ combines PLC and motion control functions into a flexible and convenient framework for multi axis stepper motor applications. The free software p/iyLOGIC™ Toolbox, the LabVIEW interface, the Android-based touch interface (internal/external) and the open protocol for controller drive and parameterising create additional scope for development. The integrated, high resolution power stages up to 15 APeak at 120 VDC simplify the wiring significantly. Designed for Industry 4.0 The phyMOTION™ can be operated below existing...

This main function is included in the respective module. The main function is not available in the respective module. Auxiliary functions are shown only if the module supports them. means the main or auxiliary function is selectable as option. The POWER SUPPLY function is marked when there is a power supply in the module (power supply unit). Modules with CPU contain intelligent processors and can execute the total sequential programs and enable the phyMOTION™ to drive in stand-alone mode. The INDEXER represents the functionality to generate signals from commands of a programming language,...

phyMOTION™ - data sheet Housing and Supply Housing types of the phyMOTION™: Type / current supply dimensions in mm Mounting bracket for rack, rack-inverse or wall mounting: +40.6 mm POWER SUPPLY The beginning of each phyMOTION Options number of slots Options number of slots • Main supply: POWER STAGE - 24 to 70 VDC supply voltage (for motors and generates internally the logic voltages) -max. 20 A - Electrically isolated 24 VDC for inputs/outputs, limit and reference switches Configuration - USB interface for programming and diagnostics - Device address switch - Reset key - Connection of an...

phyMOTION™ - data sheet POWER SUPPLY Ordering Code Status LEDs POWER STAGE 24 to 70 VDC supply voltage (for motors and generates internally the logic voltages) - max. 20 A Electrically isolated 24 VDC for inputs and outputs, limit and reference switches The external supply must be designed for the required current (e.g. by the PS5-48 power supply unit). Mating connectors are included in delivery. Compatible Power Supply Unit (5 to 20 A) • Mains supply voltage 115 / 230 VAC • Internally fused mains input • Output voltage 24 Vdc (10 A / 20 A), 48 Vdc (5 A / 10 A / 20 A), 72 Vdc (6.7 A / 13.5...

phyMOTION™ - data sheet POWER SUPPLY Ordering Code Status LEDs POWER STAGE Maximum 20 A for subsequent power stages (except MSX) • 48 to 70 VDC Power supply (for motors and generates internally the logic voltages) - max. 20 A • 24 VDC output (for e.g. sensors) Mating connectors are included in delivery. POWER SUPPLY 230 V (115 V) Power Supply (NETM01) External mains voltage (230 V / 115 • Mains switch • 230 V / 115 V mains voltage • internal supply of the phyMOTION™ with motor and logic voltage • per 500 W defined motor voltage (max. 3) • additional grounding connection if motor voltage >70...

phy MOTIONTM – data sheet Host Interface Host Interface • Selectable communication interface: - +24 VDC Supply USB mini +(24...70) VDC Supply Intelligent CPU, bus and supply: • Main CPU: Host communication Local/Remote Reset POWER STAGE Mating connectors are included in delivery. Ordering Code Intelligent CPU, bus and for internal supply: • Main CPU: • Selectable communication interface: Host Interface Ethernet ProfiBus ProfiNet Bluetooth no interface • Selectable communication interface: - Controls and administers up to 64 modules - Program and register memory up to 4 MB - Internal memory...