Catalogs >
Phytron GmbH >
Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes: OMC/TMC

Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes: OMC/TMC
4Pages

Catalog excerpts

Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes: OMC/TMC - 2

OMC/TMC are controlled by an intelligentђ motion controller. This compact all-rounderђ executes sequence programs, scans inputs, sets outputs and evaluates limit switch signals. Step resolution from 1/1 to 1/20 steps and linear or s-shaped positioning ramps are also set by the controller board.The 24 V supply voltage for the controller > DC board supplies simultaneously the limit switches. 2-phase stepper motors with 4-, 6- or 8-leads with 0.5 to 9 A phase current > Example: PC online operation / Programming with MiniLog-Comm Example: Application with operator terminal / Production data can...

Open the catalog to page 2

Compact Stand-alone Controls for 1 or 2 axes and Multi-Axis Systems up to 30 Axes: OMC/TMC - 3

OMC / 1 AxisTMC / 2 Axes > DC encoder is provided by the controller. 14-bit-AD-converter board for connectinge. g. a joystickInput resistance: > 8 kOhm Max. current: 20 mA Resolution: 14 bit, digital value between0 and 16384 incl. prefixConversion time: 6 > 190 secOMC: 4 inputsTMC: 2x4 inputsVersions: Output voltage:0/+15 V (standard), +/- 15 V, 0/+5 VInput amplifier wiring: Measuring related to ground (standard) or differentialInput wiring as 20 mA current interface Step failure indication for stepper motorswith encoder. Emergency stop in case of exceeding a given deviation between set and...

Open the catalog to page 3