Catalogs >
Physik Instrumente >
PICA piezo amplifier module

PICA piezo amplifier module
3Pages

Catalog excerpts

PICA piezo amplifier module High-Power Module with 1100 V Output Voltage, for the E-500 Piezo Controller System E-508  Peak output power up to 400 W  Output voltage range 3 to 1100 V, -3 to 1100 V or bipolar  Module for E-500 piezo controller rack  E-508.OE for switching applications  Position control (optional)  Computer interface and display modules The E-508 high-power amplifier for PICA high-voltage piezo actuators (HVPZT) is a plug-in module for the E-500 piezo controller system. This low-noise amplifier can output and sink a peak current of 50 mA (E-508.OE: up to 400 mA) in an 1100 V range. E-508 systems amplifiers provide precision control of piezo actuators and piezo positioning systems both in closed-loop (servo) and open-loop operation. Modular Design for Flexibility: Optional Servo Controller Upgrade The E-500 system is highly adaptable due to its modular design. Up to three E-508 modules can be installed in one E-500 chassis. The E-500/E-501 chassis allows an easy installation of the optional E-509 sensor- / servo-controller module for closed-loop operation. The output voltage of the E-508 is then set by the servo controller. A positioning accuracy and repeatability in the nanometer range is therefore possible depending on the piezo mechanics and the sensor type. Voltage Controlled Piezo Positioning In open-loop operation, the output voltage is determined either exactly by manually using a 10-turn DC-offset potentiometer or directly by using an analog signal. Open-loop operation is ideal for applications where fast response times and very high resolutions with a maximum bandwidth are essential. Here, commanding or reading the target position in absolute values is either not important or carried out by an external servo loop. OEM Version for Fast Switching Applications The E-508.OE high-current version has been especially designed for fast switching applications. It can output a peak current of 400 mA for 5 ms. The E-508.OE is directly controlled by an analog signal.

Open the catalog to page 1

Power amplifier for PICA high-voltage PZTs Power amplifier for PICA high-voltage PZTs

Open the catalog to page 2

E-508: Operating limits (open-loop) with various PZTloads, capacitance values in pF Ordering Information E-508.00 HVPZT piezo amplifier module, 3 to 1100 V, 1 channel E-508.OE HVPZT piezo amplifier module, OEM, 400 mA peak current Ask about custom designs!

Open the catalog to page 3

PICA piezo amplifier module 3Pages

Catalog excerpts

All Physik Instrumente catalogs and technical brochures

PICA piezo amplifier module
3Pages