F-712.IRP
6Pages

Catalog excerpts

High-Resolution Photometer For Optical Power Metering in Alignment Tasks F-712.IRP  High dynamic range  Wavelength range 600 to 1700 nm  Input range from 230 pW to 1.3 mW @ 1550 nm  Logarithmic output  Signal bandwidth of 6 kHz  Accessories for applications in optical alignment This photometer detects an optical input signal and converts it into a precision, logarithmic voltage signal with high resolution. The optical power meter is used to find the maximum optical intensity quickly when integrated in fully automatic, optical FMPA alignment systems. The logarithmic scaling of the output signal is particularly advantageous for fast scans because the signal strength can fluctuate by several orders of magnitude within a few milliseconds. The large wavelength range of the photometer enables working in both the visible and infrared range without switching. The design of the optical input interface is such that the placement of the optical fiber in the connector has no influence on the measurement of the optical signal.  A two-channel module complements the E-712 controller in F-712 alignment systems. The power is supplied via the E711.IA4. A 0.4 m long cable for connecting to one output of the E-711.IA4 is in the scope of delivery.  A single-channel benchtop device with low power requirements can be supplied via a standard USB power adapter (power adapter not in the scope of delivery). Applications Wafer probing, packaging. Accessories for FMPA alignment systems in all applications that do not require measuring the absolute value of the optical power

Open the catalog to page 1

Specifications Optical input Wavelength range FC/PC, FC/APC FC/PC, FC/APC Minimum input power at 1550 nm Maximum input power at 1550 nm Output signal Analog, logarithmic Analog, logarithmic Voltage range Logarithmic increase Operating Voltage Power connector Power consumption Overall mass Relative humidity Operating temperature range Storage temperature range See the responsivity curve for further details in the wavelength range. The bandwidth depends on the input power.

Open the catalog to page 2

Drawings / Images F-712.IRP2 as plug-in module for the E-712 controller in FMPA systems

Open the catalog to page 3

F-712.IRP1, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

Open the catalog to page 4

F-712.IRP2, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

Open the catalog to page 5

Typical responsivity depending on the wavelength Ordering Information F-712.IRP1 High-resolution optical power meter with logarithmic output signal, 600 to 1700 nm wavelength range, input power of 230 pW to 1.3 mW, 6 kHz signal bandwidth, logarithmic output voltage of 0.1 to 1.6 V, single-channel benchtop device. F-712.IRP2 High-resolution optical power meter with logarithmic output signal, 600 to 1700 nm wavelength range, input power of 230 pW to 1.3 mW, 6 kHz signal bandwidth, logarithmic output voltage of 0.1 to 1,6 V, two-channel module for the E-712 controller with E-711.IA4 analog...

Open the catalog to page 6

F-712.IRP 6Pages

Catalog excerpts

All Physik Instrumente catalogs and technical brochures

F-712.IRP
6Pages