*mydirectindustry

Catalogs
Physik Instrumente
E-709.1CC885 Digital Piezo Controller Module for C-885 PIMotionMaster

E-709.1CC885 Digital Piezo Controller Module for C-885 PIMotionMaster

Product catalog summary

Overview
The document details the specifications and features of the E-709.1CC885 digital controller module designed for single-axis piezo nanopositioning systems with capacitive sensors. It is compatible with the C-885 PIMotionMaster modular multi-axis controller system.

Controller Specifications

Processor: DSP/ARM with 150 MHz and 32-bit floating point accuracy.
Sensor Update Rate: 10 kHz.
Controller Type: P-I controller with two notch filters.
Linearization: Based on 5th-order polynomials.
Voltage Range: -30 to 130 V.

Functions and Software Support

Includes wave generator, data recorder, autozero, and trigger I/O.
Extensive software support for LabVIEW, C, C++, MATLAB, Python, and compatible with µManager, MetaMorph, Andor iQ.
Plug-and-play installation with automatic detection and communication via USB or Ethernet.

Sensor Specifications

Type: Capacitive.
Bandwidth: 5 kHz.
Resolution: 16 bit.
External Synchronization: Not supported for C-885 PIMotionMaster.

Amplifier Specifications

Output Voltage: -30 V to 130 V.
Peak Output Power: 10 W (<5 ms).
Average Output Power: 5 W (>5 ms).
Peak Current: 100 mA (<5 ms).
Average Current: 50 mA (>5 ms).
Current Limitation: Short-circuit proof.

Interfaces and Operation

Communication Interfaces: USB or Ethernet.
Connections: Sub-D special connector for piezo/sensor, HD Sub-D 26 (f) for I/O.
Command Set: PI General Command Set (GCS).
User Software: PIMikroMove.
APIs available for various programming languages and compatible with multiple software platforms.

Electrical and Environmental Properties

Operating Voltage: 24 V DC.
Max Power Consumption: 24 W.
Operating Temperature Range: 5 to 50°C (power derated above 40°C).
Dimensions: 186.42 mm × 128.4 mm × 19.98 mm.
Mass: 280 g.

Ordering Information
The E-709.1CC885 is available as a digital piezo controller module for the PIMotionMaster, supporting 1 axis with a voltage range of -30 to 130 V and capacitive sensor compatibility.

Catalog excerpts

E-709.1CC885 Digital Piezo Controller Module for C-885 PIMotionMaster-1

Digital Piezo Controller Module for C-885 PIMotionMaster For Piezo Actuator Nanopositioning Systems with Capacitive Sensor, 1 Axis E-709.1CC885  Linearity error to 0.02 %  Comprehensive I/O functions  Wave generator  Data recorder  Extensive software support Digital controller for single-axis piezo nanopositioning systems DSP/ARM processor with 150 MHz and 32-bit floating point accuracy. 10 kHz sensor update rate. P-I controller, two notch filters. Linearization algorithms based on 5th-order polynomials. Voltage range -30 to 130 V. Extensive functions, software support Wave generator. Data recorder. Autozero. Trigger I/O. Software-configurable parameters. Extensive software support, e.g., for LabVIEW, C, C++, MATLAB, python; compatible with µManager, MetaMorph, Andor iQ. PIMikroMove user software. Plug-and-play installation in the C-885 PIMotionMaster Can be inserted in any free slot. Automatic detection and external communication (USB, Ethernet) by the processor and interface module of the C-885. Can be expanded with optional digital inputs and outputs. Power via the power supply of the C-885. Controller module for piezo nanopositioning systems, for C-885 PIMotionMaster modular multi-axis controller system Supported functions Wave generator. Data recorder. Autozero. Trigger I/O. Controller type Sampling rate, servo control Sampling rate, sensor

Open the catalog to page 1

All Physik Instrumente catalogs and technical brochures