*mydirectindustry

DT-34

Product catalog summary

Overview
The DT-34 rotation stages are designed as a cost-effective and lower accuracy alternative to the PI miCos DT-50 stage. These stages are belt-driven, allowing for higher rotation speeds and are suitable for applications in microscopy due to their 10 mm diameter clear aperture. The design ensures near zero backlash and smooth motion, equipped with optical reference switches and driven by either a DC or 2-phase stepper motor.

Specifications

Load Characteristics: Fx: 1.5 N, Fz: 2.8 N, Mx: 0.5 Nm, Mz: 0.08 Nm
Travel Range: 360°, endless
Weight: 0.15 kg
Motor Options: DC-B-010, 2Phase-010
Gearbox Ratios: 22.0335 for DC, 75.892187 for 2Phase
Maximum Speed: 675°/sec for DC, 195°/sec for 2Phase
Resolution: Calculated: 0.00004° (RE) for DC, 0.001098° (FS) for 2Phase; Typical: 0.02°
Repeatability: Bi-directional: ±0.08°, Uni-directional: 0.04°
Nominal Current: 0.32 A for DC, 1.2 A for 2Phase
Voltage Range: 12 V
Belt Drive Reduction: 2:1
Material: Aluminum, black anodized

Additional Features

Uni-directional repeatability down to 0.015°
Load capacity up to 0.28 kg
Integrated reference switch
Compact design with a 1/2 inch UNC thread mount

Order Information

3215910030: DT-34 Rotation Stage, DC Motor-B-010, Optical Reference Switches-030
3215920030: DT-34 Rotation Stage, 2-Phase Stepper Motor-020, Optical Reference Switches-030
3215920030-0001: DT-34 Rotation Stage, 2-Phase Stepper Motor-020, Optical Reference Switches-030, Ultratherm 2000

Catalog excerpts

Rotation Stage DT-34 Uni- directional repeatability down to 0.015 ° Maximum speed on request °/ sec Load capacity up to 0.28 kg Integrated reference switch Clear aperture 10 mm Rotation Range 360°, endless With thread mount 1/2 inch UNC Compact design The new DT-34 rotation stages are a low cost and lower accuracy alternative to the PI miCos DT-50 stage. The belt driven DT-34 rotation stage allows a much higher speed of rotation in comparison to other stages. The clear aperture of 10 mm diameter is suitable for many applications in the microscopy area. The belt driven combination is preloaded to produce near zero backlash and a smooth motion. DT-34 rotation stages are equipped with optical reference switches and are driven by a DC or 2- phase stepper motor. Specifications DT-34 Load Characteristics Specifications Travel range (°) Specifications Motor Belt Drive Reduction Aluminum, black anodized Aluminum, black anodized © Physik Instrumente (PI) GmbH und Co. KG 2014. Subject to change without notice. Latest releases available at www.pi.ws

Open the catalog to page 1

Order Information 3215910030 DT-34 Rotation Stage, DC Motor- B-010, Optical Reference Switches-030 3215920030 DT-34 Rotation Stage, 2- Phase Stepper Motor-020, Optical Reference Switches-030 3215920030-0001 DT-34 Rotation Stage, 2- Phase Stepper Motor-020, Optical Reference Switches-030, Ultratherm 2000 © Physik Instrumente (PI) GmbH und Co. KG 2014. Subject to change without notice. Latest releases available at www.pi.ws

Open the catalog to page 2

Drawings / Images © Physik Instrumente (PI) GmbH und Co. KG 2014. Subject to change without notice. Latest releases available at www.pi.ws

Open the catalog to page 3

Open the catalog to page 4

All Physik Instrumente catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list